Low Cycle Fatigue Behaviour of Irradiated Stainless Steel As ShieldingMaterial
International Congress on the Advances in NuclearPower Plants (ICAPP '06), Reno, NV/AMERİKA BİRLEŞİK DEVLETLERİ, 4 Haziran 2006, s. 2101-2104
BAYDOĞAN N.D., BAYDOĞAN M., TUGRUL A.B., ÇİMENOĞLU H.
|
Investigation on cyclic deformation behaivour of reinforced steel bars
11th. International Conference on Fracture, Turin/İTALYA, 20 Mart 2005
BAYDOGAN M., UYSAL A., KAYALİ E.S., CİMENOGLU H.
|
The Novel Conductive Heating Technique for Steel Sheets prior to Die Quenching
uenching5th International Conference on Diffusion in Soli,ds and Liquids, Roma/İTALYA, 24 Haziran 2009
OZCAN I., LİVATYALI H., BAYDOGAN M., CİMENOĞLU H.
|
Effect of Nitriding and PVD CrN Coating on the Wear Performance of an AISI D2 Tool Steel
1st International Surface Treatment Symposium, İstanbul/TÜRKİYE
ALPASLAN. Ö., ÇELİK Ö., ATAR E., ÇİMENOĞLU H.
|
Impact Sliding Wear Performances of Quenched and Tempered Hot Work Tool Steels
UDCS’xx19 Fourth International Iron and Steel Symposium, karabük/TÜRKİYE, 4 Nisan 2019
AKYILDIZ EZGİ,MUHAFFEL FAİZ,ALTAY MERT,ÖZKURT SEÇKİN,ATAR ERDEM,ÇİMENOĞLU HÜSEYİN
|
POST WELD HEAT TREATMENT APPLIED in EXAMINING THE MECHANICAL PROPER TIES of 13CrMo4 5 and X10CrMoVNb9 1 GRADE STEEL
IMSTEC 2016, 6 Nisan 2016
KIRBAS CANER,ÇİÇEK BÜNYAMİN,BAYDOĞAN NİLGÜN,ÇİMENOĞLU HÜSEYİN
|
Impact-Sliding Wear Behaviour of Nitrided H13 Steel Tool Steels
33rd International Conference on Surface Modification Technologies, 26 Haziran 2019
AKYILDIZ EZGİ,ALTAY MERT,MUHAFFEL FAİZ,ÖZKURT SEÇKİN,ATAR ERDEM,ÇİMENOĞLU HÜSEYİN
|
Elevated Temperature Wear Behavior of Paste Borided 42CrMo4 and X20Cr13 Steels
2nd International Iron and Steel Symposium, 1 Nisan 2015
MOTALLEBZADEH AMİR,DİLEKTAŞLI EMRE,BAYDOĞAN MURAT,ATAR ERDEM,ÇİMENOĞLU HÜSEYİN
|
A comparison of workability and mechanical properties of normal and lightweight SCC mixtures with and without steel fibers
SCC 2008: Challenges and Barriers to Application: The 3th North American Conference on the Design and Use of SCC, 1 Kasım 2008
TASDEMİR MEHMET ALİ,ATAHAN HAKAN NURİ,GÖKALP İSMAİL,YERLİKAYA MEHMET
|
Effect of coarse aggregate concentration on the bond properties between steel rebar and concrete within low and medium strength range
Construction and Building Materials, Vol. 449, Ekim 2024, ISSN: 0950-0618
BIÇAKÇI SİDAR NİHAT,TÜRKMENOĞLU HASAN NURİ,BARAN ŞERVAN,ABOKAF OSAMA,MAHERIAN MAHSA FARSHBAF,ATAHAN HAKAN NURİ
|
Evaluation of Microsilica and Nanosilica on Bond Properties between Moderate–High Strength Concrete and Plain–Ribbed Steel Rebar
Journal of Materials in Civil Engineering, Vol. 36, Şubat 2024, ISSN: 0899-1561
BIÇAKÇI SİDAR NİHAT,BARAN ŞERVAN,BOYACI BÜŞRA,TÜRKMENOĞLU HASAN NURİ,TURAN ÖMER TUĞRUL,ATAHAN HAKAN NURİ
|
A stainless-steel micro-scanner for rapid 3D confocal imaging
Journal of Physics D: Applied Physics, Vol. 52, No. 30, Temmuz 2019, s. 305101, ISSN: 0022-3727
OYMAN HİLMİ ARTUN,EFE BARIŞ CAN,İÇEL MUSTAFA AKIN,GÖKDEL YİĞİT DAĞHAN,FERHANOĞLU ONUR,YALÇINKAYA ARDA DENİZ
|
A Laser-Machined Stainless-Steel Micro-Scanner for Confocal Microscopy
Eurosensors, 3 Eylül 2017
OYMAN HİLMİ ARTUN,İÇEL MUSTAFA AKIN,EFE BARIŞ CAN,GÖKDEL YİĞİT DAĞHAN,FERHANOĞLU ONUR,YALÇINKAYA ARDA DENİZ
|
The Effect of Nitriding On High Temperature Wear Resistance of High Speed Tool Steels
2nd International Iron and Steel Symposium, 1 Nisan 2015
BOSTAN BURCU,AMİR MOTALLEBZADEH,ATAR ERDEM,ÇİMENOĞLU HÜSEYİN
|
Experimental and analytical studies of sub-standard RC frames retrofitted with buckling-restrained braces and steel frames
Bulletin of Earthquake Engineering, Vol. 18, No. 5, Mart 2020, s. 2389-2410, ISSN: 1570-761X
SÜTCÜ FATİH,BAL AHMET,FUJİSHİTA KAZUHİRO,RYOTA MATSUİ,ÇELİK OĞUZ CEM,TAKEUCHİ TORU
|
Composite behavior in RC buildings retrofitted using buckling-restrained braces with elastic steel frames
Engineering Structures, Vol. 219, Eylül 2020, s. 110896, ISSN: 0141-0296
PANUMAS SAINGAM,SÜTCÜ FATİH,TERAZAWA YUKİ,FUJİSHİTA KAZUHİRO,LİN PAO CHUN,ÇELİK OĞUZ CEM,TAKEUCHİ TORU
|
CYCLIC LOADING TESTS OF SUB STANDARD RC FRAMES RETROFITTED WITH BUCKLING RESTRAINED BRACES AND ELASTIC STEEL FRAMES
Journal of Structural and Construction Engineering (Transactions of AIJ), Vol. 81, No. 727, Eylül 2016, s. 1575-1584, ISSN: 1340-4202
FUJISHITA KAZUHIRO,BAL AHMET,SÜTCÜ FATİH,RYOTA MATSUI,TERASHIMA MASAO,ÇELİK OĞUZ CEM,TAKEUCHI TORU
|
RESPONSE EVALUATION OF BRB RETROFIT IN RC BUILDINGS BY CONSIDERING THE COMPOSITE EFFECT OF ELASTIC STEEL FRAME
AIJ Journal of Technology and Design, Vol. 23, No. 53, Ocak 2017, s. 147-152, ISSN: 1341-9463
KAZUHİRO FUJİSHİTA,RYOTA MATSUİ,SÜTCÜ FATİH,TAKEUCHİ TORU
|
Cyclic Loading Tests of Sub standard RC Frames Retrofitted with Buckling Restrained Braces and Elastic Steel Frames Part 2
Architectural Institute of Japan(AIJ) Annual Conference 2016, FUKUOKA/JAPONYA, 24 Ağustos 2016
FUJISHITA KAZUHIRO,BAL AHMET,SÜTCÜ FATİH,MATSUI RYOTA,TERASHIMA MASAO,ÇELİK OĞUZ CEM,TAKEUCHI TORU
|
Cyclic Loading Tests of Sub standard RC Frames Retrofitted with Buckling Restrained Braces and Elastic Steel Frames Part 1
Architectural Institute of Japan(AIJ) Annual Conference 2016, FUKUOKA/JAPONYA, 24 Ağustos 2016
SÜTCÜ FATİH,FUJISHITA KAZUHIRO,BAL AHMET,MATSUI RYOTA,TERASHIMA MASAO,ÇELİK OĞUZ CEM,TAKEUCHI TORU
|