Controlling rheological and filtration properties of sepiolite based drilling fluids under elevated temperatures and pressures
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2010
ALİ ETTEHADİ OSGOUEİ
|
An experimental and numerical investigation of warpage behavior of silicon substrates at cryogenic temperatures
Fen Bilimleri Enstitüsü, Orta Doğu Teknik Üniversitesi, 2016
EYÜP CAN BALOĞLU
|
High rate anaerobic treatment of domestic wastewater at ambient operating temperatures A review on benefits and drawbacks
Journal of Environmental Science and Health A, Vol. 45, No. 10, 2010, s. 1169-1184
GÖMEÇ ÇİĞDEM
|
Identification of Archaeal population in the granular sludge of an UASB reactor treating sewage at low temperatures
Journal of Environmental Science and Health, Part A, Vol. 43, No. 13, Ekim 2008, s. 1504-1510, ISSN: 1093-4529
GÖMEÇ ÇİĞDEM,LETSİOU I,OZTURK I,EROGLU V,WİLDERER P
|
Combined anaerobic treatment of domestic wastewater and landfill leachate at psychrophilic temperatures
Fresenius Environmental Bulletin, Vol. 17, No. 11A, 2008, s. 1828-1832
GÖMEÇ ÇİĞDEM,CİFCİ D I,OZTURK I,KINACI CUMALİ
|
Kinetic Model for Desulphurization at Low Temperatures Using Hydrated Sorbent
THERMOCHIMICA ACTA, Vol. 335, 1999, s. 127-134, ISSN: 0040-6031
MERİÇBOYU AYŞEGÜL
|
Adhesive Ceramic Integrated Structure at Cryogenic Temperatures
International Microelectronics Assembly and Packaging Society (IMAPS), 12th International Conference and Exhibition on Device Packaging, 15 Mart 2016
BALOĞLU EYUP CAN,OKUTUCU ÖZYURT HANİFE TUBA,DURSUNKAYA ZAFER
|
The glass transition temperatures of amorphous linear aliphatic polyesters
Polymer, Vol. 124, Ağustos 2017, s. 235-245, ISSN: 00323861
SHEN JIALONG,CAYDAMLI YAVUZ,GÜRARSLAN ALPER,Lİ SHANSHAN,TONELLI ALAN E
|
Kinetic model for desulphurization at low temperatures using hydrated sorbent
Thermochimica Acta, Vol. 335, No. 1-2, Eylül 1999, s. 127-134, ISSN: 00406031
YAVUZ NİLGÜN,MERİÇBOYU AYŞEGÜL,YAVUZ REHA,OSKAY SADRİYE
|
The determination of performances of polysulfone PS ultrafiltration membranes fabricated at different evaporation temperatures for the pretreatment of textile wastewater
DESALINATION, Ocak 2013, s. 110-119, ISSN: 0011-9164
İMER DERYA YÜKSEL
|
ASSESSMENT OF THE RELATIONSHIP BETWEEN LAND USE/COVER CHANGES AND LAND SURFACE TEMPERATURES: A CASE STUDY OF THERMAL REMOTE SENSING
FRESENIUS ENVIRONMENTAL BULLETIN, Vol. 28, No. 2, Şubat 2019, s. 541-547, ISSN: 1018-4619
ÇELİK BAHADIR,KAYA ŞİNASİ,ALGANCI UĞUR,ŞEKER DURSUN ZAFER
|
Dry sliding wear behaviour of Al Fe Si V alloys at elevated temperatures
WEAR, Vol. 322323, 2015, s. 101-107, ISSN: 0043-1648
KORAMAN EMRAH,BAYDOĞAN MURAT,SAYILGAN SEDA,KALKANLI ALİ
|
Effect of temperatures on residual stress and microstructure of 3d transition metals doped ZnO thin films
International Conference on Condensed Matter and Materials Science ICCMMS-2017, 11 Ekim 2017
BAYTAK TUĞBA,TOSUN MURAT,İPEK CENGİZ,BULUT OSMAN,DÖNMEZ ABDULLAH,ALPHAN MEHMET CAN,ATAOĞLU ŞENOL,ARDA LÜTFİ
|
Determination of Thermal Behaviour of Afşin-Elbistan Lignite and Chars Produced from Lignite at Different Temperatures
14th International Combustion Symposium INCOS2018, Karabük/TÜRKİYE, Vol. 1, 25 Nisan 2018, s. 439-442
KURT DEMİR GÜLŞEN,AÇMA HANZADE,YAMAN SERDAR
|
Determination of Thermal Behaviour of RDF Refuse Derived Fuel and Chars Produced from RDF at Different Temperatures
Waste Management Symposium, Vol. 1, 2 Mayıs 2016, s. 366-371
KURT DEMİR GÜLŞEN,AÇMA HANZADE,YAMAN SERDAR
|
Morphological evaluation and quantitative effect of sulphuric extension on B160 220 rheological behaviour at high temperatures
Construction and Building Materials, Vol. 127, Kasım 2016, s. 457-465, ISSN: 09500618
GEDİK ABDULGAZİ,LAV ABDULLAH HİLMİ
|
Determination of Thermal Behaviour of RDF Refuse Derived Fuel and Chars Produced from RDF at Different Temperatures
Eurasia 2016 Waste Management Symposium, İstanbul/TÜRKİYE, Vol. 1, 2 Mayıs 2016
KURT GÜLŞEN,AÇMA HANZADE,YAMAN SERDAR
|
Determination of Thermal Behaviour of Afşin-Elbistan Lignite and Chars Produced from Lignite at Different Temperatures
14th International Combustion Symposium INCOS2018, Karabük/TÜRKİYE, Vol. 1, 25 Nisan 2018, s. 439-442
KURT DEMİR GÜLŞEN,AÇMA HANZADE,YAMAN SERDAR
|
Modeling and measurement of cutting temperatures in milling
7th HPC 2016 – CIRP Conference on High Performance Cutting, Vol. 46, 31 Mayıs 2016, s. 173-176
BUDAK ERHAN,KARAGÜZEL UMUT,BAKKAL MUSTAFA
|
Monthly and Seasonal Trend Analysis of Maximum Temperatures over Turkey
International Journal of Engineering Science and Computing, Vol. 7, No. 11, Kasım 2017, s. 15537-15541, ISSN: 2321-3361
ÖZGÜR EVREN,AKBAYIR İBRAHİM,DENİZ ALİ
|