Chicken Feather and Olive Cake as Renewable Support Materials for Lipase Immobilization
7th International Conference on Biobased and Biodegradable Polymers (BIOPOL-2019), Stokholm/İSVEÇ, 17 Haziran 2019
ALALUF KAREN, ÜLKER TURAN CANSU, ÖZDEMİR GÜNSELİ, GÜVENİLİR FATOŞ YÜKSEL
|
Stress relaxation and humidity dependence in sodium alginate-glycerol films
Journal of the Mechanical Behavior of Biomedical Materials, Vol. 100, Aralık 2019, s. 103374, ISSN: 1751-6161
GİZ AYŞE SU,AYDELİK-AYAZOGLU SENA,CATALGİL-GİZ HUCESTE,BAYRAKTAR HALİL,ALACA BURHANETTİN ERDEM
|
The effect of phase change material (PCM) utilization on air-cooled condenser capacity
Alternative Energy Sources, Materials Technologies (AESMT’18), 13 Mayıs 2018, ISSN: 2603-364X
YALÇIN ENVER,KILIC ALEVAY,AYDIN AHMET ALPER
|
Increased osteoblast adhesion on nanoparticulate calcium phosphates with higher Ca P ratios
Journal of Biomedical Materials Research Part A, Vol. 85, No. 1, Nisan 2008, s. 236-241, ISSN: 15493296
ERGUN CELALETDİN,HUİNAN L,WEBSTER T,OLCAY E,YILMAZ Ş,ŞAHİN FİLİZ
|
Material model parameter estimation with genetic algorithm optimizationmethod and modeling of strain and temperature dependent behavior ofepoxy resin with cooperative-VBO model
MECHANICS OF MATERIALS, 2019, ISSN: 0167-6636
ÇOLAK ÖZGEN ÜMİT,ÇAKIR YÜKSEL
|
Dielectric Properties of Nano SizeMagnesium Aluminum Silicates and Titanates Prepared by Soft Chemistry
12th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM 12), including Glass Optical Materials Division Meeting (GOMD 2017), 21 Mayıs 2017
ÖZTÜRK ÇAĞRI,KONDAKÇI EMİN,LÖKÇÜ ERSU,ÖZDEMİR ALPER,SOLAK NURİ
|
Experimental Phase Diagram Studies inthe La-Sr-Ga-Mg-Ni-O System for Solid Oxide Fuel Cells
12th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM 12), including Glass Optical Materials Division Meeting (GOMD 2017), 21 Mayıs 2017
SOYDAN GİZEM,KONDAKÇI EMİN,DEMİRKESEN ANIL,SOLAK NURİ
|
Assessment of materials and resources credit achievements of LEED-certified buildings in Turkey based on certification levels
Journal of Construction Engineering, Management Innovation, Vol. 3, No. 1, Mart 2020, s. 17-28, ISSN: 2630-5771
TÜRKOĞLU HARUN,POLAT TATAR GÜL,DAMCI ATİLLA
|
Estimating Volume Fractions of Microstructural Constituents in Austempered High Silicon Alloyed GJS 600-10 Ductile Iron through Magnetic Measurements (VSM)
Materials Science Forum, Vol. 907, 2017, s. 50-55
YÜREKTÜRK YAKUP,BAYDOĞAN MURAT
|
Service Life Estimation for a Reformer Tube against Creep Dominated Failure
Materials Testing, Vol. 54, 2012, s. 49-52, ISSN: 0025-5300
BAYDOĞAN MURAT,KAYALI EYÜP SABRİ,ÇİMENOĞLU HÜSEYİN
|
Improved Resistance to Stress Corrosion Cracking Failures via Optimized Retrogression and Reaging of 7075 T6 Aluminum Sheets
Metallurgical and Materials Transactions A, Vol. 39, No. 10, 2008, s. 2470-2476
BAYDOĞAN MURAT, ÇİMENOĞLU HÜSEYİN, KAYALI EYÜP SABRİ, RASTY JAHAN
|
An Alternative Source for Ceramics and Glass Raw Materials: Augen-Gneiss
Minerals, Vol. 7, No. 5, Mayıs 2017, s. 70, ISSN: 2075-163X
KANGAL MURAT OLGAÇ,BULUT GÜLAY,YEŞİLYURT ZEYNEP,GÜVEN ONUR,BURAT FIRAT
|
Characterization of Thermally Oxidized Ti6Al7Nb Alloy for Biological Applications
METALS AND MATERIALS INTERNATIONAL, Vol. 17, No. 5, 2011, s. 765-770, ISSN: 1598-9623
ÇİMENOĞLU HÜSEYİN,MEYDANOĞLU ONUR,BAYDOĞAN MURAT,BERMEK HAKAN,HÜNER PINAR,KAYALI EYÜP SABRİ
|
Effect of Phase Change Material (PCM) Utilization on Air-Cooled Condenser Capacity in One Stage Vapor Compressed Refrigeration System
1st International Scientific Conference on Alternative Energy Sources, Materials Technologies, 14 Mayıs 2018
YALÇIN ENVER,AYDIN AHMET ALPER,KILIÇ GÜLENAY ALEVAY
|
Effect of aluminizing and austempering processes on structural, mechanical and wear properties of a SSF ductile iron
Materials Research Express, Vol. 6, No. 1, Ocak 2019, s. 16550, ISSN: 2053-1591
YÜREKTÜRK YAKUP,BAYDOĞAN MURAT
|
Micro arc oxidation of Ti6Al4V and Ti6Al7Nb alloys for biomedical applications
Materials Characterization, Vol. 62, No. 3, 2011, s. 304-311
ÇİMENOĞLU HÜSEYİN, GÜNYÜZ MERT, KÖSE GAMZE TORUN, BAYDOĞAN MURAT, UĞURLU FAYSAL, ŞENER CEM
|
Fabrication and characterization of Ni W solid solution alloys via mechanical alloying and pressureless sintering
Materials and Design, Vol. 42, 2012, s. 495-504, ISSN: 0264-1275
GENÇ AZİZ,ÖVEÇOĞLU MUSTAFA LUTFİ,BAYDOĞAN MURAT,TURAN SERVET
|
Optimization of Thixoforging Parameters for C70S6 Steel Connecting Rods
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 25, No. 11, 2016, s. 5020-5029, ISSN: 1059-9495
ÖZKARA İSA METİN,BAYDOĞAN MURAT
|
Improvement of ThermoelectricProperties and Phase Studies in p-type Ca3Co4O9 Ceramics
12th Pacific Rim Conference on Ceramic and Glass Technology (PACRIM 12), including Glass Optical Materials Division Meeting (GOMD 2017), 21 Mayıs 2017
DEMİRKESEN ANIL,KURT FATİH,YARIŞ EFE,ÖZDEMİR ALPER,SOLAK NURİ
|
Influence of different wall materials on emulsion stability and droplet size of emulsions prepared with hazelnut oil
THE INTERNATIONAL SYMPOSIUM ON FOOD RHEOLOGY AND TEXTURE, İstanbul/TÜRKİYE, 19 Ekim 2018
ŞAHİN YEŞİLÇUBUK NEŞE,ZAHRAN HAMDY
|