One-Step Method for Printing Strain Sensors on GFRP: Assessment of Sensor Pattern Effect
23rd International Conference on Composite Materials (ICCM23), BELFAST/İRLANDA, 30 Ağustos 2023
ALRAİ ADEL, ÖZDEN YENİGÜN ELİF, CEBECİ FEVZİ ÇAKMAK, ASADİ AMİR, KÖKEN DENİZ, CEBECİ HÜLYA
|
Establishing Synergistic Effects of BN and CNT on the Thermal Conductivity of Peek Filaments for 3D Printing
20th European Conference on Composite Materials (ECCM20), Lausanne/İSVİÇRE, 26 Haziran 2022
BOZKURT YUNUS EMRE, YILDIZ ALPTEKİN, EMANETOĞLU UĞUR, CEBECİ HÜLYA
|
From Coloration to Energy Harvesting Screen Printing Technoılogy to Establish Monolithic Dye Sensitized Solar Cell
5. International Istanbul Textile Congress, Vol. 5, No. 1, 11 Eylül 2015
ŞİMŞEK RAMAZAN,ÇALIŞIR MEHMET DURMUŞ,SEVİM ALTUĞ MERT,KILIÇ ALİ,DEMİR ALİ
|
Establishing Synergistic Effects of BN and CNT on the Thermal Conductivity of Peek Filaments for 3D Printing
20th European Conference on Composite Materials (ECCM20), Lausanne/İSVİÇRE, 26 Haziran 2022
BOZKURT YUNUS EMRE, YILDIZ ALPTEKİN, EMANETOĞLU UĞUR, CEBECİ HÜLYA
|
Sulfonium salt based charge transfer complexes as dual thermal and photochemical polymerization initiators for composites and 3D printing
Royal Society of Chemistry (RSC), Vol. 10, No. 34, Ocak 2019, s. 4690-4698, ISSN: 1759-9954
WANG DENGXİA,KAYA KEREM,GARRA PATXİ,FOUASSİER JEAN PİERRE,GRAFF BERNADETTE,YAĞCI YUSUF,LALEVEE JACQUES
|
New Additions to the Guitar Family: Lego and Automatic Microtonal Guitars
MUSICOLOGIST, Vol. 6, No. 1, Ocak 2022, ISSN: 2618-5652
ÇOĞULU TOLGAHAN, ÇOĞULU ATLAS, ACET RUŞEN CAN, BAŞAR BATUHAN, ITALİA TONY, KESER SELÇUK
|
3D printing of hexagonal boron nitride nanosheets/polylactic acid nanocomposites for thermal management of electronic devices
Elsevier BV, Vol. 265, Ekim 2023, ISSN: 1359-8368
GÖRÜR MUSTAFA CANER, DOĞANAY DOĞA, DURUKAN METE BATUHAN, ÇİÇEK MELİH ÖGEDAY, KALAY YUNUS EREN, KINCAL CEM, SOLAK NURİ, ÜNALAN HÜSNÜ EMRAH
|
Wearable and flexible humidity sensor fabrication using pad printing technique
2022 SARC International Conference on Advanced Electrical and Electronics Engineering, Athens/YUNANİSTAN, 25 Temmuz 2022, s. 51-54
TEKÇİN MELTEM, SAYAR ERSİN, KURŞUN BAHADIR SENEM
|
Wearable and Flexible Humidity Sensor Fabrication using Pad Printing Technique
International Journal of Advances in Science, Engineering and Technology(IJASEAT), Vol. 10, No. 3, Temmuz 2022, s. 84-87, ISSN: 2321–9009
TEKÇİN MELTEM, SAYAR ERSİN, KURŞUN BAHADIR SENEM
|
Process improvement and efficiency analysis using the Single‐Minute Exchange of Dies method applied to the set‐up and operation of screen‐printing machines
Wiley, Vol. 139, Şubat 2023, ISSN: 1472-3581
ŞAHİN UMUT KIVANÇ, KURŞUN SENEM, EMEKDAR ELÇİN, AÇIKGÖZ TUFAN HATİCE
|
A Research on Technology Development Centers New Approaches in Urban and Regional Planning
Istanbul/TÜRKİYE, 2009, s. 344-356, Cenkler Printing Office
GÜLERSOY NURAN ZEREN,ÖNEM AYŞE BUKET,ARSLANLI KEREM YAVUZ,AYATAÇ HATİCE
|
Prototyping Generative Architecture: Experiments on Multi-Agent Systems, Environmental Performance and 3D Printing
8.ASCAAD (Arab Society for Computer Aided Architectural Design) Conference, Londra/İNGİLTERE, Vol. 1, No. 1, 7 Kasım 2016, s. 145-153
YAZICI SEVİL,GERBER DAVID J
|
Synthesis of ultraviolet (UV)-curable water-borne polyurethane acrylate binders and comparison of their performance for pigment printing on synthetic leather
International Journal of Clothing Science and Technology, Şubat 2021, ISSN: 0955-6222
BAYSAL GÜLÇİN,KELEŞ GİZEM,KALAV BERDAN,GÜNER FATMA SENİHA,KARAGÜZEL KAYAOĞLU BURÇAK
|
From Coloration to Energy Harvesting Screen Printing Technology to Establish Monolithic Dye Sensitized Solar Cell
5th International Istanbul Textile Congress 2015: Innovative Technologies “Inspire to Innovate, İstanbul/TÜRKİYE, 11 Eylül 2015
ŞİMŞEK RAMAZAN,ÇALIŞIR MEHMET DURMUŞ,SEVİM ALTUĞ MERT,KILIÇ ALİ,DEMİR ALİ
|
Synthesis, contact printing, and device characterization of Ni-catalyzed, crystalline InAs nanowires
Nano Research, Vol. 1, No. 1, Temmuz 2008, s. 32-39, ISSN: 1998-0124
FORD ALEXANDRA C.,HO JOHNNY C.,FAN ZHIYONG,ERGEN ONUR,ALTOE VIRGINIA,ALONI SHAUL,RAZAVI HALEH,JAVEY ALI
|
Characterization and treatment of textile printing wastewaters
Environmental Technology, Vol. 21, No. 10, Ocak 2000, s. 1147-1155
KABDASLİ I , GUREL M , TUNAY O
|
Screen Printing of Synthetic Leather Using Pigmented UV Curable Water Based Polyurathane Acrylate Binder
16th AUTEX World Textile Conference 2016, Ljubljana, SLOVENIA, LJUBLJANA/SLOVENYA, 8 Haziran 2016
ÖZDEMİR ÜMİT GÖKHAN,KALAV BERDAN,KARAGÜZEL KAYAOĞLU BURÇAK,YILDIZ BÜLENT,AKBULUT GÖKHAN,EREN MESUT
|
Gloss and hardness evaluation of water-based uv curable polyurethane acrylate film used in textile printing
Vlakna a Textil, Vol. 25, No. 3, Eylül 2018, s. 30-36, ISSN: 1335-0617
KALAV BERDAN,BAYSAL GÜLÇİN,KARAGÜZEL KAYAOĞLU BURÇAK
|
Screen printing of UV curable polyurethane acrylate binder prepared with different pigment concentrations on synthetic leather and gloss and hardness properties of printed films
18th AUTEX World Textile Conference, 20 Haziran 2018
BAYSAL GÜLÇİN,KALAV BERDAN,KARAGÜZEL KAYAOĞLU BURÇAK
|
The Effect of System Variables on Reactive Printing
III. International Textile, Clothing Design Conference, Croatia (ITC DC), 8 Ekim 2006
KALAV BERDAN,DAYIOĞLU HABİP
|