Indentation creep behavior of Fe–8Ni–xZr oxide dispersion strengthened alloys
Walter de Gruyter GmbH, Vol. 65, Temmuz 2023, ISSN: 0025-5300
TEKİN MUSTAFA, MUHAFFEL FAİZ, KOTAN HASAN, BAYDOĞAN MURAT
|
Indentation creep behavior of Fe–8Ni–xZr oxide dispersion strengthened alloys
Walter de Gruyter GmbH, Vol. 65, Temmuz 2023, ISSN: 0025-5300
TEKİN MUSTAFA, MUHAFFEL FAİZ, KOTAN HASAN, BAYDOĞAN MURAT
|
Residual Stress Measurements of Thermally Oxidised Ti 6Al 4V Alloy by Indentation Technique
XIII International Materials Research Congress, Cancun/MEKSİKA
GULERYUZ H., ATAR E., CİMENOGLU H., KAYALI E.S.
|
Investigation of thermal conduction in microcontacts created by indentation
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2022
AHMED ULUCA
|
Investigation of wear and depth-sensing indentation behavior of thermally stabilized Fe-Ni-Zr alloys
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2017
MUSTAFA TEKİN
|
Recycled and devulcanized rubber modified epoxy-based composites reinforced with nano-magnetic iron oxide, Fe 3 O 4
Composites Part B: Engineering, Vol. 148, Eylül 2018, s. 1-13, ISSN: 1359-8368
İREZ ALAEDDİN BURAK,BAYRAKTAR EMİN,MİSKİOGLU İBRAHİM
|
Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt. Si-10 wt. TiB2 composites produced by sequential milling and pressureless sintering
International Journal of Materials Research, Vol. 110, No. 11, Kasım 2019, s. 1047-1057, ISSN: 1862-5282
TEKOĞLU EMRE,YÜREKTÜRK YAKUP,AĞAOĞULLARI DUYGU,SHAIKD ASAD ALI DILAWARY,BAYDOĞAN MURAT,ÖVEÇOĞLU MUSTAFA LUTFİ
|
A set of indices based on indentation tests for assessment of rock cutting performance and rock properties
Journal of The South African Institute of Mining and Metallurgy, Kasım 2003
COPUR HANİFİ,BİLGİN NUH,TUNCDEMİR HAKAN,BALCI CEMAL
|
A set of indices based on indentation tests for assessment of rock cutting performance and rock properties
The Journal of The South African Institute of Mining and Metallurgy, Vol. 103, No. 9, Kasım 2003, s. 589-599, ISSN: 0038223X300000
ÇOPUR HANİFİ,BİLGİN NUH,TUNÇDEMİR HAKAN,BALCI CEMAL
|
A Brittleness Concept Based on Indentation Tests for Assessment of Rock Cuttability
Proc. of the 10th Int. Symp. on Mine Plan. and Equip. Sel. (MPES2001), 19 Kasım 2001, s. 783-788
ÇOPUR H., TUNÇDEMİR H., BALCI C., ÖZTÜRK C.A.
|
Toughening mechanisms on recycled rubber modified epoxy based composites reinforced with graphene nanoplatelets
Annual Conference of the Society for Experimental Mechanics 2018, 4 Haziran 2018, s. 283, ISSN: 21915652 21915644
İREZ ALAEDDİN BURAK,MİSKİOGLU İBRAHİM,BAYRAKTAR EMİN
|
Design of cost effective epoxy scrap rubber based composites reinforced with titanium dioxide and alumina fibers
Annual Conference of Society for Experimental Mechanics 2018, 4 Haziran 2018, s. 59, ISSN: 21915652 21915644
İREZ ALAEDDİN BURAK,MİSKİOGLU İBRAHİM,BAYRAKTAR EMİN
|
Mechanical Characterization of Epoxy – Scrap Rubber Based Composites Reinforced with Nano Graphene
Annual Conference Society for Experimental Mechanics 2017, Vol. 6, 12 Haziran 2017, s. 45, ISSN: 21915652 21915644
İREZ ALAEDDİN BURAK,MİSKİOGLU İBRAHİM,BAYRAKTAR EMİN
|
Characterization of hard coatings by depth sensing indentation measurements indentor effects
Surface and Coatings Technology, Vol. 99, No. 3, Şubat 1998, s. 311-318, ISSN: 02578972
ROTHER B,KAZMANLI MUHAMMET KÜRŞAT
|
Identification of cracks generated by indentation experiments in hard coating systems
Surface and Coatings Technology, Vol. 107, No. 1, Ağustos 1998, s. 65-75, ISSN: 02578972
KAZMANLI MUHAMMET KÜRŞAT,ROTHER B,ÜRGEN MUSTAFA KAMİL,MİTTERER C
|
Effect of Plasma Nitriding on the Performance of WC-Co Cutting Tools
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 20, No. 3, Ocak 2011, s. 405-408, ISSN: 1059-9495
YILMAZ ŞAFAK,GÜLMEZ TURGUT,HAMZAOGLU EBRU
|
Mantle convection in the Middle East Reconciling Afar upwelling Arabia indentation and Aegean trench rollback
EARTH AND PLANETARY SCIENCE LETTERS, Vol. 375, Ağustos 2013, s. 254-269, ISSN: 0012-821X
CLAUDİO FACCENNA,THORSTEN W BECKER,LAURENT JOLİVET,KESKİN MEHMET
|
Elevated Temperature Wear Behavior of AZ91 Magnesium Alloy After Micro-Arc Oxidation in Single and Dual Phase Electrolytes
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, Vol. 145, No. 7, Temmuz 2023, s. 8, ISSN: 0742-4787
SELVİ EKİN, KABA MERTCAN, MUHAFFEL FAİZ, VANLI ALİ SERDAR, BAYDOĞAN MURAT
|
Suggestion of new models for predicting performance of raise boring machines based on indentation tests
Elsevier BV, Vol. 138, Ağustos 2023, ISSN: 0886-7798
SHATERPOUR MAMAGHANI AYDIN, ÇOPUR HANİFİ, BALCI CEMAL, TUMAÇ DENİZ, KOÇBAY AYHAN, DOĞAN ENGİN, ALTINTAŞ ERGÜN, ERDOĞAN TAYFUN, ŞİRİN ONUR, GÜMÜŞ ARİF
|
Suggestion of new models for predicting performance of raise boring machines based on indentation tests
Tunnelling and Underground Space Technology, Mayıs 2023, s. 1-22, ISSN: 0886-7798
SHATERPOUR MAMAGHANİ AYDIN, ÇOPUR HANİFİ, BALCI CEMAL, TUMAÇ DENİZ, KOÇBAY AYHAN, DOGAN ENGİN, ALTİNTAS ERGUN, ERDOGAN TAYFUN, ŞİRİN ONUR, GÜMÜŞ ARİF
|