ARAMA SONUÇLARI

Toplam 21 adet sonuçtan 20 tanesi görüntülenmektedir.

Arama









Yıllara göre arama

Özel Aralık Girişi

Residual Stress Measurements of Thermally Oxidised Ti 6Al 4V Alloy by Indentation Technique
XIII International Materials Research Congress, Cancun/MEKSİKA
GULERYUZ H., ATAR E., CİMENOGLU H., KAYALI E.S.
Hüseyin Çimenoğlu Tam metin bildiri
Investigation of thermal conduction in microcontacts created by indentation
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2022
AHMED ULUCA
Hakan Özgür Özer Tez Yüksek Lisans Tamamlandı
Investigation of wear and depth-sensing indentation behavior of thermally stabilized Fe-Ni-Zr alloys
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2017
MUSTAFA TEKİN
Murat Baydoğan Tez Yüksek Lisans Tamamlandı
Recycled and devulcanized rubber modified epoxy-based composites reinforced with nano-magnetic iron oxide, Fe3O4
COMPOSITES PART B-ENGINEERING, Vol. 148, No. null, Eylül 2018, s. 1-13, ISSN: 1359-8368
İREZ ALAEDDİN BURAK,BAYRAKTAR EMİN,MİSKİOGLU İBRAHİM
A set of indices based on indentation tests for assessment of rock cutting performance and rock properties
Journal of South African Institute of Mining and Metallurgy, Vol. 103, No. 9, Kasım 2003, s. 589-600, ISSN: 0038223X
ÇOPUR HANİFİ,BİLGİN NUH,TUNÇDEMİR HAKAN,BALCI CEMAL
Hakan Tunçdemir Özgün Makale
A set of indices based on indentation tests for assessment of rock cutting performance and rock properties
Journal of The South African Institute of Mining and Metallurgy, Kasım 2003
ÇOPUR HANİFİ,BİLGİN NUH,TUNÇDEMİR HAKAN,BALCI CEMAL
Hakan Tunçdemir Özgün Makale
Development of new performance prediction models for a raise boring machine based on indentation tests
AusRock Conference 2022, 29 Kasım 2022
SHATERPOUR MAMAGHANİ AYDIN, ÇOPUR HANİFİ, BALCI CEMAL, TUMAÇ DENİZ, DOĞAN ENGİN, ALTINTAŞ E, KOÇBAY AYHAN, ERDOĞAN TAYFUN, GÜMÜŞ ARİF
Cemal Balcı Tam metin bildiri
Development of New Performance Prediction Models for a Raise Boring Machine Based on Indentation Tests
AusRock Conference, Melbourne/AVUSTRALYA, 29 Kasım 2022, s. 1-5
SHATERPOUR MAMAGHANİ AYDIN, ÇOPUR HANİFİ, BALCI CEMAL, TUMAÇ DENİZ, DOĞAN ENGİN, ALTINTAŞ E., KOÇBAY AYHAN, ERDOĞAN TAYFUN, GÜMÜŞ ARİF
Deniz Tumaç Tam metin bildiri
Bildiri_Development of new performance prediction models for a raise boring machine based on indentation tests
AusRock Conference, Melbourne/AVUSTRALYA, 29 Kasım 2022
SHATERPOUR MAMAGHANİ AYDIN, ÇOPUR HANİFİ, BALCI CEMAL, TUMAÇ DENİZ, DOĞAN ENGİN, ALTINTAŞ ERGÜN, KOÇBAY AYHAN, ERDOĞAN TAYFUN, GÜMÜŞ ARİF
Hanifi Çopur Tam metin bildiri
A set of indices based on indentation tests for assessment of rock cutting performance and rock properties
Journal of South African Institute of Mining and Metallurgy, Vol. 103, No. 9, Kasım 2003, s. 589-600, ISSN: 0038223X
ÇOPUR HANİFİ,BİLGİN NUH,TUNÇDEMİR HAKAN,BALCI CEMAL
Hanifi Çopur Özgün Makale
Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt. Si-10 wt. TiB2 composites produced by sequential milling and pressureless sintering
International Journal of Materials Research, Vol. 110, No. 11, Kasım 2019, s. 1047-1057, ISSN: 1862-5282
TEKOĞLU EMRE,YÜREKTÜRK YAKUP,AĞAOĞULLARI DUYGU,SHAIKD ASAD ALI DILAWARY,BAYDOĞAN MURAT,ÖVEÇOĞLU MUSTAFA LUTFİ
Murat Baydoğan Özgün Makale
A set of indices based on indentation tests for assessment of rock cutting performance and rock properties
Journal of The South African Institute of Mining and Metallurgy, Kasım 2003
COPUR HANİFİ,BİLGİN NUH,TUNCDEMİR HAKAN,BALCI CEMAL
Cemal Balcı Özgün Makale
A set of indices based on indentation tests for assessment of rock cutting performance and rock properties
The Journal of The South African Institute of Mining and Metallurgy, Vol. 103, No. 9, Kasım 2003, s. 589-599, ISSN: 0038223X300000
ÇOPUR HANİFİ,BİLGİN NUH,TUNÇDEMİR HAKAN,BALCI CEMAL
Hakan Tunçdemir Özgün Makale
Toughening mechanisms on recycled rubber modified epoxy based composites reinforced with graphene nanoplatelets
Annual Conference of the Society for Experimental Mechanics 2018, 4 Haziran 2018, s. 283, ISSN: 21915652 21915644
İREZ ALAEDDİN BURAK,MİSKİOGLU İBRAHİM,BAYRAKTAR EMİN
Design of cost effective epoxy scrap rubber based composites reinforced with titanium dioxide and alumina fibers
Annual Conference of Society for Experimental Mechanics 2018, 4 Haziran 2018, s. 59, ISSN: 21915652 21915644
İREZ ALAEDDİN BURAK,MİSKİOGLU İBRAHİM,BAYRAKTAR EMİN
Mechanical Characterization of Epoxy – Scrap Rubber Based Composites Reinforced with Nano Graphene
Annual Conference Society for Experimental Mechanics 2017, Vol. 6, 12 Haziran 2017, s. 45, ISSN: 21915652 21915644
İREZ ALAEDDİN BURAK,MİSKİOGLU İBRAHİM,BAYRAKTAR EMİN
A Brittleness Concept Based on Indentation Tests for Assessment of Rock Cuttability
Proc. of the 10th Int. Symp. on Mine Plan. and Equip. Sel. (MPES2001), 19 Kasım 2001, s. 783-788
ÇOPUR H., TUNÇDEMİR H., BALCI C., ÖZTÜRK C.A.
Cüneyt Atilla Öztürk Tam metin bildiri
Mantle convection in the Middle East Reconciling Afar upwelling Arabia indentation and Aegean trench rollback
EARTH AND PLANETARY SCIENCE LETTERS, Vol. 375, Ağustos 2013, s. 254-269, ISSN: 0012-821X
CLAUDİO FACCENNA,THORSTEN W BECKER,LAURENT JOLİVET,KESKİN MEHMET
Mehmet Keskin Özgün Makale Yerbilimi
Characterization of hard coatings by depth sensing indentation measurements indentor effects
Surface and Coatings Technology, Vol. 99, No. 3, Şubat 1998, s. 311-318, ISSN: 02578972
ROTHER B,KAZMANLI MUHAMMET KÜRŞAT
Identification of cracks generated by indentation experiments in hard coating systems
Surface and Coatings Technology, Vol. 107, No. 1, Ağustos 1998, s. 65-75, ISSN: 02578972
KAZMANLI MUHAMMET KÜRŞAT,ROTHER B,ÜRGEN MUSTAFA KAMİL,MİTTERER C

İLETİŞİM BİLGİLERİ

İstanbul Teknik Üniversitesi Rektörlüğü İTÜ Ayazağa Kampüsü Rektörlük Binası, Maslak-Sarıyer / İstanbul Tel: +90 212 285 3930