Development of CNC-reinforced PBAT nanocomposites with reduced percolation threshold: a comparative study on the preparation method
JOURNAL OF MATERIALS SCIENCE, Vol. 55, Ağustos 2020, s. 15523-15537, ISSN: 0022-2461
VATANSEVER EMRE, ARSLAN DOĞAN, SARUL DENİZ SEMA, GÜNEŞ GÜRBÜZ, KAHRAMAN YUSUF, DURMUŞ ALİ, NOFAR MOHAMMADREZA
|
Effect of solvent type on the dispersion quality of spray-and freeze-dried CNCs in PLA through rheological analysis
CARBOHYDRATE POLYMERS, Vol. 268, Eylül 2021, ISSN: 0144-8617
OZDEMİR BURCU, NOFAR MOHAMMADREZA
|
Isothermal and non-isothermal cold crystallization kinetics of polylactide/cellulose nanocrystal (PLA/CNC) nanocomposites
Journal of Thermal Analysis and Calorimetry, Vol. 147, Eylül 2022, ISSN: 1388-6150
ALANALP M. BEGUM, OZDEMİR BURCU, NOFAR MOHAMMADREZA, DURMUŞ ALİ
|
Development of CNC-reinforced PBAT nanocomposites with reduced percolation threshold: a comparative study on the preparation method
JOURNAL OF MATERIALS SCIENCE, Vol. 55, No. 32, Kasım 2020, s. 15523-15537, ISSN: 0022-2461
VATANSEVER EMRE,ARSLAN DOĞAN,SARUL DENİZ SEMA,KAHRAMAN YUSUF,GÜNEŞ GÜRBÜZ,DURMUŞ ALİ,NOFAR MOHAMMADREZA
|
Effect of Mixing Strategy on the Structure-Properties of the PLA/PBAT Blends Incorporated with CNC
JOURNAL OF RENEWABLE MATERIALS, Vol. 10, No. 1, Ocak 2022, s. 149-164, ISSN: 2164-6325
SARUL DENİZ SEMA, ARSLAN DOGAN, VATANSEVER EMRE, KAHRAMAN YUSUF, DURMUŞ ALİ, SALEHİYAN REZA, NOFAR MOHAMMADREZA
|
Design and Implementation of 3 Axis CNC Router for Computer Aided Manufacturing Courses
2016 7th International Conference on Mechatronics and Manufacturing (ICMM 2016), New York City/AMERİKA BİRLEŞİK DEVLETLERİ, Vol. 45, 7 Ocak 2016, s. 5002
AKTAN MEHMET EMİN,AKKUŞ NİHAT,YILMAZ ABDURRAHMAN,AKDOĞAN ERHAN
|
Estimation of cutting forces in CNC slot-milling of low-cost clay reinforced syntactic metal foams by artificial neural network modeling
Multidiscipline Modeling in Materials and Structures, Vol. 20, No. 3, Mart 2024, s. 417-436, ISSN: 1573-6105
BOLAT ÇAĞIN,ÇOBAN SARP,ERGENE BERKAY,AKGÜN İSMAİL CEM,GÖKŞENLİ ALİ
|
Design and Testing of Deployable Antennas for Wireless Charging of Low Power Sensors
The 2015 IEEE AP-S Symposium on Antennas and Propagation and URSI CNC/USNC Joint Meeting, Vancouver/KANADA, 19 Temmuz 2015
YILMAZ ABDOLSAHEB TUBA,ZANE REGAN,BAKTUR REYHAN
|
Surface Modification of Cellulose Nanocrystal (CNC) and Its Dispersion in PLA Matrix
EPF European Polymer Congress (EPF 2022), Prag/ÇEK CUMHURİYETİ, 26 Haziran 2022
ARSLAN ONUR,GÜNTÜRKÜN DİLARA,ÖZDEMİR BURCU,BEKEM AYLİN,ALKAN GÖKSU YONCA,NOFAR MOHAMMADREZA
|
Behaviour of a single pile in sloped liquefiable soils
60th Canadian Geotechnical Conference and 8th Joint CGS/IAH-CNC Groundwater Conference, ottawa/KANADA, 21 Ekim 2007, s. 959-964
TEYMÜR BERRAK,YILDIZ SADİ CEM
|
An empirical research for CNC technology implementation in manufacturing SMEs
The International Journal of Advanced Manufacturing Technology, Vol. 34, No. 11-12, Ekim 2007, s. 1144-1152, ISSN: 0268-3768
KOÇ VEHBİ TUFAN,BOZDAĞ CAFER ERHAN
|
Hesaplamalı Örüntü Tasarımında Yapım Kuralları: CNC Frezeleme ile Bir Deneme
11. Mimarlıkta Sayısal Tasarım Ulusal Sempozyumu, Ankara/TÜRKİYE, 14 Haziran 2017, s. 10-21
HAMZAOĞLU BEGÜM,ÖZKAR MİNE
|
Fabrication of thin film nanocomposite pressure retarded osmosis (PRO) membranes using cellulose nanocrystal (CNC) and evaluation of performances in the processes
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2021
MEHMET EMİN PAŞAOĞLU
|
5 EKSENLİ ALÜMİNYUM CNC İŞLEME TEZGÂHININ DİNAMİK
YAPISININ İNCELENMESİ
11th International Congress of Machining, 9 Aralık 2021, s. 273-286
BAKKAL MUSTAFA, PEHLİVAN TOPRAK, ÇEKİR SEYFEDDİN, ALGIR AYŞENUR, YETER ALPER, AZ ERDEM, KARAGÜZEL UMUT, ÖZŞAHİN ORKUN
|
BÜYÜK VERİ VE YAPAY ZEKA UYGULAMALARI İLE CNC TEZGAH
SAĞLIĞI TAKİBİ VE YÖNETİMİ
11th INTERNATIONAL CONGRESS ON MACHINING PROGRAMME, 9 Aralık 2021, s. 171-180
BAKKAL MUSTAFA, VURAL MİRAÇ EKİM, YURTSEVER TAYLAN, MERDOL ŞÜKRÜ DORUK, ÇAKIR MUAMMER ALTAN
|