Are standard wastewater treatment plant design methods suitable for any municipal wastewater
Water Science & Technology, Vol. 66, No. 2, Haziran 2012, s. 328, ISSN: 0273-1223
İNSEL HAYRETTİN GÜÇLÜ,GÜDER BERK,GÜNEŞ GIYASETTİN,ÇOKGÖR EMİNE
|
Conceptual basis for the appropriate design of biological wastewater treatment systems drawbacks of existing prescriptions
Desalination and Water Treatment, Vol. 26, No. 1-3, Ağustos 2012, s. 104-110, ISSN: 1944-3994
İNSEL HAYRETTİN GÜÇLÜ,DÜLEKGÜRGEN EBRU,SÖZEN SEVAL,DERİN ORHON
|
Multilevel full factorial design in optimizing polymer type and blend ratio for PLA/PCL and PLLA/PCL electropsun webs
AUTEX 2022, Lodz/POLONYA, 7 Haziran 2022
ÖZTEMUR JANSET, YALÇIN ENİŞ İPEK, SEZGİN HANDE, ÖZDEMİR SUZAN
|
Examination of the Impact of Polymer Composition and the Test Direction on Tensile Properties of Bilayer Vascular Grafts Using a Multilevel Full Factorial Design Approach
INTERNATIONAL CONFERENCE ON APPLIED SCIENCE, ENGINEERING AND TECHNOLOGY(ICASET-2023), 29 Kasım 2023
ÖZTEMUR JANSET, YALÇIN ENİŞ İPEK, SEZGİN HANDE, ÖZDEMİR SUZAN
|
INVESTIGATION OF THE EFFECTS OF POLYMER TYPE AND FIBER ORIENTATION ON BURST STRENGTH OF THE TUBULAR SCAFFOLDS BY MULTILEVEL FULL FACTORIAL DESIGN
8th International Symposium „Technical Textiles – Present and Future, 23 Kasım 2023
ÖZTEMUR JANSET, YALÇIN ENİŞ İPEK, SEZGİN HANDE, ÖZDEMİR SUZAN
|
Design of an Impact Absorbing Composite Panel from Denim Wastes and Acrylated Epoxidized Soybean Oil based Epoxy Resins
Tekstil Ve Konfeksiyon, Temmuz 2021, ISSN: 1300-3356
ÖZTEMUR JANSET, YALÇIN ENİŞ İPEK, SEZGİN HANDE
|
Adaptive Adjustment of Process Noise Covariance in Kalman Filter for Estimation of AUV Dynamics Underwater Vehicles. Design and Applications
NY/AMERİKA BİRLEŞİK DEVLETLERİ, 2021, s. 1-34, Nova Science Publishers, Inc.
HACIZADE CENGİZ, VURAL SITKI YENAL, HACİZADE ULVİYE
|
Fault Detection in Flight Control Systems via Innovation Sequence of Kalman Filter Progress in System and Robot Analysis and Control Design Lecture Notes in Control and Information Sciences
LONDON/İNGİLTERE, 1999, s. 63-74, Springer
HAJİYEV CHİNGİZ, CALİSKAN FİKRET
|
Hydrometallurgical recycling of waste NdFeB magnets: design of experiment, optimisation of low concentrations of sulphuric acid leaching and process analysis
Informa UK Limited, Vol. 62, Nisan 2022, ISSN: 0008-4433
UYSAL EMİRCAN, EMİL KAYA ELİF, AL SERHAT, STOPİC SRECKO, FRİEDRİCH BERND, GÜRMEN SEBAHATTİN
|
Recovery of Diamond and Cobalt Powder from Polycrystalline Drawing Die Blanks via Ultrasound-Assisted Leaching Process—Part 1: Process Design and Efficiencies
Metals, Vol. 10, No. 6, Haziran 2020, s. 731, ISSN: 2075-4701
FRİEDRİCH BERND, STOPİC SRECKO, GÜRMEN SEBAHATTİN, KİEBLİNG FERDİNAND
|
Estimation of shear wave velocity profiles inversion of spatial autocorrelation coefficients
GeoFlorida 2010: Advances in Analysis, Modeling and Design, Palm Beach, FA/AMERİKA BİRLEŞİK DEVLETLERİ, 20 Şubat 2010, s. 892-899
FİRTANA K, KOCAOGLU A
|
Design Study of A Heavy Oil Field Development
Türkiye 20. Uluslararası Petrol ve Doğal Gaz Kongre ve Sergisi, 27 Mayıs 2015
OKUYUCU İLKNUR,ÇALIŞKAN OĞUZ,AYHAN YUNUS,KORKMAZ BAŞEL EMİNE DİDEM,TÜREYEN ÖMER İNANÇ,SATMAN ABDURRAHMAN
|
Effects of Number of Wells And Natural Recharge Configurations onThe Design of Geothermal Power Plant Capacity
Inerma 2017, iSTANBUL/TÜRKİYE, 30 Eylül 2017
ALTUNDAĞ MERVE,YEŞİL FATİH G,KORKMAZ BAŞEL EMİNE DİDEM,TÜREYEN ÖMER İNANÇ,SATMAN ABDURRAHMAN
|
The performance evaluation of the modular design of hybrid wall with surface heating and cooling system
A/Z : ITU journal of Faculty of Architecture, Vol. 13, No. 2, Ocak 2016, s. 31-37, ISSN: 1302-8324
ERİKÇİ ÇELİK SELCEN NUR,ZORER GEDİK GÜLAY,PARLAKYILDIZ BURCU,KOCA ALİİHSAN,ÇETİN GÜRSEL,GEMİCİ ZAFER
|
Design of A Novel High Performance Aerator For Hydroponic Cultures and Its Numerical and Experimental Performance Analysis
International Conference on Science and Technology - ICONST 2018, Prizren/KOSOVA, 5 Eylül 2018, s. 698-710
KOCA ALİİHSAN
|
Numerical Simulation of Annular Flow boiling in Millimeter-scale Channels and Investigation of Design Parameters Using Taguchi Method
International Conferences on Science and Technology (ICONST 2019), Prizren/KOSOVA, Vol. 1, 26 Ağustos 2019, s. 311-319
KOCA ALİİHSAN,NASİRİ MANSOUR
|
A Comparison between the General and Design Principles for Members under Shear and Bending according to TS 4561 and Eurocode 3
10th. Nordic Steel Construction Conference ’04, Kopenhag/DANİMARKA, Vol. 1, 7 Haziran 2004, s. 25-33
BÜYÜKTAŞKIN HALET ALMILA,BÜYÜKTAŞKIN MEHMET ILGAZ,YARDIMCI NESRİN
|
Modular Design Used in the Constructional Erection of a Roof in Cylindrical Vault Shape
8th. Nordic Steel Construction Conference ’98, Bergen/NORVEÇ, Vol. 1, 14 Eylül 1998, s. 387-394
BÜYÜKTAŞKIN HALET ALMILA,TEVFİK SENO ARDA
|
Framework for development of driver adaptive warning and assistance systems that will be triggered by a driver inattention monitor
International Journal of Vehicle Design, Vol. 52, No. 1/2/3/4, Ocak 2010, s. 20-37, ISSN: 0143-3369
AYTEKİN BURCU,DİNÇMEN ERKİN,GÜVENÇ BİLİN AKSUN,ALTUĞ ERDİNÇ,GÜVENÇ LEVENT,DANİŞ FAHRİ SERHAN,ACARMAN TANKUT,SEZER VOLKAN,ARARAT ÖNCÜ,ÖNCÜ SİNAN
|
Combined fuzzy approach for online speed planning and control with real vehicle implementation
International Journal of Vehicle Design, Vol. 68, No. 4, Şubat 2015, s. 329-345, ISSN: 0143-3369
SEZER VOLKAN
|