CIRCULAR ECONOMY IN METAL FOUNDRY SECTOR: FROM EUROPE TO TÜRKİYE
21 International Metallurgy and Materials Congress, İstanbul/TÜRKİYE, Vol. 1, 6 Ekim 2022, s. 660-663
ATEŞ SEMİH, DİZDAR KEREM CAN, ŞEN TUNÇAĞ CİHANGİR, HATİPOĞLU SERTER KORAY, ARISOY CEVAT FAHİR
|
Investigation of alternative ways for recycling waste foundry sand: an extensive review to present benefits
CANADIAN JOURNAL OF CIVIL ENGINEERING, Vol. 45, No. 6, Ocak 2018, s. 423-434, ISSN: 0315-1468
GEDİK ABDULGAZİ,LAV ABDULLAH HİLMİ,LAV MUSAFFA AYŞEN
|
Investigation of alternative ways for recycling waste foundry sand: an extensive review to present benefits
CANADIAN JOURNAL OF CIVIL ENGINEERING, Vol. 45, No. 6, Ocak 2018, s. 423-434, ISSN: 0315-1468
GEDİK ABDULGAZİ,LAV ABDULLAH HİLMİ,LAV MUSAFFA AYŞEN
|
The effect of dead clay contents on mechanical properties of foundry molding sands
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2022
MEHRAN JALALI KANDELOUS
|
Utilization of waste foundry sand as highway material
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2008
ABDULGAZİ GEDİK
|
Organik Pollutants in Foundry Waste Sands
ISWA World Environment Congress&Exhibition
YERLİKAYA. C,, BALLA J., OKUTAN. H,, EKİNCİ, E, H, EKİNCİ, E,
|
Leaching Characterization of Heavy Metal Pollutants from Foundry Waste Sands
ISWA World Environment Congress&Exhibition
YERLİKAYA. C,, OKUTAN. H,, EKİNCİ. E,
|
Fabrication Optimization of Al 7075/Expanded Glass Syntactic Foam by Cold Chamber Die Casting
Archives of Foundry Engineering, Vol. 3, Temmuz 2020, s. 112-118, ISSN: 1897-3310
BOLAT ÇAĞIN, GÖKŞENLİ ALİ
|
Effects of particle size, bimodality and heat treatment on mechanical properties of pumice reinforced aluminum syntactic foams produced by cold chamber die casting
China Foundry, Vol. 18, No. 6, Kasım 2021, s. 529-540, ISSN: 1672-6421
BOLAT ÇAĞIN, AKGÜN İSMAİL CEM, GÖKŞENLİ ALİ
|
Flaw Detection of Cast-Steel Safety Parts in Automotive Application
ARCHIVES OF FOUNDRY ENGINEERING, Vol. 22, No. 1, Ocak 2022, s. 5, ISSN: 1897-3310
DİZDAR KEREM CAN, ŞAHİN HAYATİ, ARDIÇLI METİN, DIŞPINAR DERYA
|
Mechanical Property Comparison of Al11Si Wheels Grain Refined by Ti, Nb and MTS
Archives of Foundry Engineering, Vol. 22, No. 4, Nisan 2022, ISSN: 2299-2944
AYDOĞAN FERHAT, DİZDAR KEREM CAN, ŞAHİN HAYATİ, MENTEŞE ELVAN, DIŞPINAR DERYA
|
Processing of Boron Nitride Nanotubes Reinforced Aluminum Matrix Composite
ARCHIVES OF FOUNDRY ENGINEERING, Vol. 22, No. 2, Ocak 2022, s. 6, ISSN: 1897-3310
NEMUTLU BATUHAN, KAHRAMAN OSMAN, DEMİREL KADİR BORA, ERKUL İLAYDA, ÇİÇEK MUHSİN, ŞAHİN HAYATİ, DİZDAR KEREM CAN, DIŞPINAR DERYA
|
Effects of particle size, bimodality and heat treatment on mechanical properties of pumice reinforced aluminum syntactic foams produced by cold chamber die casting
CHINA FOUNDRY, Vol. 18, No. 6, Ocak 2021, s. 529-540, ISSN: 1672-6421
BOLAT ÇAĞIN, AKGÜN İSMAİL CEM, GÖKŞENLİ ALİ
|
Optimization of foundry sand characteristics of soda activated calcium bentonite
Applied Clay Science, Vol. 52, No. 1-2, Nisan 2011, s. 104-108, ISSN: 01691317
BOYLU FERİDUN
|
Utilization of waste foundry sand (WFS) as impermeable layer (drainage blanket) for pavement structures
ADVANCES IN TRANSPORTATION GEOTECHNICS, No. null, 25 Ağustos 2008, s. 263-268
SOLMAZ P,GEDİK ABDULGAZİ,LAV MUSAFFA AYŞEN,LAV ABDULLAH HİLMİ
|
Utilization of waste foundry sand as pavement sub-base and fill material
ADVANCES IN TRANSPORTATION GEOTECHNICS, No. null, 25 Ağustos 2008, s. 143-147
,GEDİK ABDULGAZİ,LAV MUSAFFA AYŞENLAV ABDULLAH HİLMİ
|
Foundry Air Emission Factors And Modeling
1st International Workshop on 'Environmental Quality and Environmental Engineering in The Middle East Region, KONYA/TÜRKİYE, 5 Ekim 1998, s. 142-148
ÜNLÜ NECİP,ATA ALİ,ERUSLU MEHMET NİYAZİ
|
Utilization of waste foundry sand as pavement sub-base and fill material
1st international conferance on transportation geotechnics, 25 Ağustos 2008, s. 143-147
GEDİK ABDULGAZİ,LAV MUSAFFA AYŞEN,LAV ABDULLAH HİLMİ
|
Development and Evaluation of a New Eco-friendly Sodium Silicate-Based Binder System
International Journal of Metalcasting, Vol. 12, No. 4, Ekim 2018, s. 765-771, ISSN: 1939-5981
ÜNLÜ NECİP,ODABAŞ AHMET
|