ARAMA SONUÇLARI

Toplam 66 adet sonuçtan 20 tanesi görüntülenmektedir.

Arama









Yıllara göre arama

Özel Aralık Girişi

Reinforcement of Dogu Sanayi Station Face with injection mold and polyurethane injection foam at Atakoy-Ikitelli Metro Project
Proceedings of the 4th International Underground Excavations Symposium, 13 Ekim 2018
ÇALIŞKAN UFUK CEMALİ,BALCI CEMAL,YAZICI HA,İLKDOGAN TA
Cemal Balcı Tam metin bildiri
THE INVESTIGATION OF DIFFERENT PORT FUEL INJECTION PARAMETERS OF A SMALL SPARK IGNITION ENGINE
INTERNATIONAL CONFERENCE ON PROGRESSES IN AUTOMOTIVE TECHNOLOGIES 2018, istanbul/TÜRKİYE, 10 Mayıs 2018
DEMİRCİ ABDURRAHMAN,CİHAN ÖMER,DOĞAN HÜSEYİN EMRE,KUTLAR OSMAN AKIN
DESIGN OF A DIESEL ENGINE CONTROL SYSTEM TO CHANGE THE NUMBER OF INJECTION AND THE EFFECTS OF MULTI PHASE INJECTION ON NOX EMISSION LEVELS AND THE PERFORMANCE
Sigma, Vol. 33, No. 4, Aralık 2015, s. 665-676, ISSN: 1304-7191
ERGENÇ ALP TEKİN,ERGENÇ ALİ FUAT,OLGUN BURAK,FATİH RAVALI
Ali Fuat Ergenç Özgün Makale
Numerical analysis of an early direct injection in a Wankel engine
7th International Conference on Renewable Fuels Combustion and Fire, Antalya/TÜRKİYE, 25 Ocak 2019, s. 175-178
TAŞKIRAN ÖZGÜR OĞUZ,KURT SEÇKİN BURAK,ÇALIK ALPER TOLGA,KUTLAR OSMAN AKIN
A New Analytical Calculation Method on Injection Molding Proces of Composite Luggage Rack Holder
The international VDI Congress, 29 Mart 2017
BAKKAL MUSTAFA,DOĞRU SAMİ,OTUZ OKAN
Mustafa Bakkal Tam metin bildiri
Injection-molded PP composites reinforced with talc and nanoclay for automotive applications
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, Nisan 2019, ISSN: 0892-7057
NOFAR MOHAMMADREZA,ÖZGEN ELİF,GİRGİNER BURCU
Mohammadreza Nofar Özgün Makale
Time-dependent performance evaluation of cyclic injection of gas mixtures into hydraulically-fractured wells in Appalachian sandstones
AAPG Eastern Section Meeting, 24 Eylül 2017
ARTUN FAZIL EMRE
Fazıl Emre Artun Özet Bildiri
Development and characterization investigations of ceramic composites and hard magnets fabricated by powder injection molding
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2012
NİL ÜNAL
Mustafa Lutfi Öveçoğlu Tez Doktora Tamamlandı
Pressure and temperature behaviors of single-phase water geothermal reservoirs under various production/injection schemes
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2013
YILDIRAY PALABIYIK
Ömer İnanç Türeyen Tez Doktora Tamamlandı
Experimental analysis of direct injection in wankel engine
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2018
MAJID JAVADZADEHKALKHORAN
Osman Akın Kutlar Tez Yüksek Lisans Tamamlandı
Hot injection synthesis and structural and optical characterization of CdSe/ZnSe and CdSe/ZnS quantum dots
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2017
MEHRDAD FARAJI
Hilmi Ünlü Tez Yüksek Lisans Tamamlandı
Effects of low temperature cleaning process on laser welding quality of injection components
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2014
BURÇAK DERYA ÇAVLICA
Hüseyin Çimenoğlu Tez Yüksek Lisans Tamamlandı
Characterization of time-based degradation effects and machine learning-based modeling of hot carrier injection in 40 NM CMOS transistors
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2021
XHESİLA XHAFA
Mustafa Berke Yelten Tez Yüksek Lisans Tamamlandı
Development of a screening model for the cyclic steam injection (CSI) process
Fen Bilimleri Enstitüsü, Orta Doğu Teknik Üniversitesi, 2018
GAMZE YALGIN
Fazıl Emre Artun Tez Yüksek Lisans Tamamlandı
Flexible Computer Based Control of Ignition and Injection Units of a Gasoline Engine with Skip Cycle Mechanism
Machines Technologies and Materials, No. 6, Haziran 2013, s. 33-38, ISSN: 1313-0226
TEKELİ ÖZGÜR, DOĞRU BARIŞ, BAYKARA CEMAL, KUTLAR OSMAN AKIN , ARSLAN HİKMET
Barış Doğru Özgün Makale
Effect of Ozone Injection Location on Filter Performance in Direct Filtration
WATER SCIENCE AND TECHNOLOGY, Vol. 46, No. 9, Kasım 2002, s. 171-177, ISSN: 0273-1223
YÜKSEL EBUBEKİR,AKGİRAY ÖMER,SAATÇİ AHMET METE,SARIKAYA HASAN ZAHURİ,KOYUNCU İSMAİL
İsmail Koyuncu Özgün Makale
Analytical modeling of flow regimes during cyclic CO2 injection in hydraulically fractured tight reservoirs for enhanced oil recovery
Journal of Petroleum Science and Engineering, Vol. 101, No. 108385, Haziran 2021, s. 1-14, ISSN: 0920-4105
MUGISHA JOSHUA, AL-RBEAWI SALAM, ARTUN FAZIL EMRE
Fazıl Emre Artun Özgün Makale
Development of high void fraction polylactide composite foams using injection molding Mechanical and thermal insulation properties
Composites Science and Technology, Vol. 90, Ocak 2014, s. 88-95, ISSN: 02663538
AMELİ A,JAHANİ DAVUD,NOFAR MOHAMMADREZA,JUNG PJ,PARK CB
Mohammadreza Nofar Özgün Makale
Fabrication of hBN CNT Polymer Matrix Composites by Ball Milling and Injection Molding Methods
Conference on Advanced Composite Materials and Structures(CACMS), 13 Nisan 2015
OVALI DİDEM,KAVRAR DENİZ,YUMAKGİL KÜBRA, DUMAN ŞEYMA,CEBECİ HÜLYA,ÖZKAL BURAK,ÖVEÇOĞLU MUSTAFA LUTFİ
Acoustically generated unsteady vorticity field in a long narrow cylinder with sidewall injection
Journal of Engineering Mathematics, Vol. 42, No. 1, 2002, s. 65-90, ISSN: 00220833
KIRKKÖPRÜ KADİR,DAVID R KASSOY,QING ZHAO,PETER L STAAB
Kadir Kırkköprü Özgün Makale

İLETİŞİM BİLGİLERİ

İstanbul Teknik Üniversitesi Rektörlüğü İTÜ Ayazağa Kampüsü Rektörlük Binası, Maslak-Sarıyer / İstanbul Tel: +90 212 285 3930