FLEXIBLE COMPUTER BASED CONTROL OF IGNITION AND INJECTION UNITS OF A GASOLINE ENGINE WITH SKIP CYCLE MECHANISM
Trans and Motauto’xx 13, Varna/BULGARİSTAN, Vol. 1, 1 Temmuz 2013, s. 11-16, ISSN: 1310-3946
TEKELİ ÖZGÜR,DOĞRU BARIŞ,BAYKARA CEMAL,KUTLAR OSMAN AKIN,ARSLAN HİKMET
|
Numerical investigation of fuel injection port design on partially premixed methane-air combustor
15th International Conference on Computational Heat & Mass Transfer (ICCHMT), 19 Mayıs 2025
ADIGÜZEL MEHMET KAĞAN,GÜNGÖR AYŞE GÜL
|
Effect of Methanol Injection Timing on Performance of Marine Diesel Engines and Emission Reduction
Journal of Marine Science and Engineering, Vol. 13, Mayıs 2025, ISSN: 2077-1312
DEMİREL HAKAN,YU CAİRUİ,TİAN XİN,BAŞHAN VEYSEL,GUO HAO,BOLAT FIRAT
|
Theoretical analysis on the laminar flow of an elastico viscous fluid between a moving elliptic plate with constant injection and the ground
Scientific Research and Essays, Vol. 8, Haziran 2013, s. 890-901
BARIŞ SERDAR,DOKUZ MEHMET SALİH
|
The effects of the side walls on the flow of a second grade fluid in ducts with suction and injection
International Journal of Non-Linear Mechanics, 2007
ERDOĞAN MEHMET EMİN,İMRAK CEVAT ERDEM
|
The use of solid phase extraction and direct injection of a copolymersorbent as slurry into the graphite furnace prior to determination ofcadmium by ETAAS
INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY, Vol. 88, No. 2, Ocak 2008, s. 141-150, ISSN: 0306-7319
BAYSAL ASLI, AKMAN SÜLEYMAN, TOKMAN NİLGÜN
|
Effects of application of variable valve timing on the exhaust gas temperature improvement in a low-loaded diesel engine
Applied Thermal Engineering, Vol. 122, Temmuz 2017, s. 758-767, ISSN: 13594311
ÖZSOYSAL OSMAN AZMİ,BASARAN HASAN USTUN
|
Experimental study on the effect of injection parameters on proppant transport in rough vertical hydraulic fractures SPE-190041-MS
SPE Western Regional Meeting, Garden Grove California/AMERİKA BİRLEŞİK DEVLETLERİ, 22 Nisan 2018, s. 1-17
HUANG HAİ,BABADAGLİ TAYFUN,Lİ HUAZHOU ANDY,DEVELİ KAYHAN,WEİ GE
|
Effect of injection parameters on proppant transport in rough vertical fractures: An experimental analysis on visual models
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, Vol. 180, Eylül 2019, s. 380-395, ISSN: 0920-4105
HUANG HAİ,BABADAGLİ TAYFUN,Lİ HUAZHOU ANDY,DEVELİ KAYHAN,WEİ GE
|
Resilience and Stability Analysis of Distributed Secondary Controllers in DC Microgrids Under Cyber Attacks and Communication Delays
Institute of Electrical and Electronics Engineers (IEEE), Vol. 11, Kasım 2023, s. 132296-132311, ISSN: 2169-3536
ÖZDEMİR GÜLCİHAN
|
Optimization of Engineering Design Parameters of Injection Foams for Strengthening Purposes
2025 SME Annual Conference and Expo, Denver, Colorado/AMERİKA BİRLEŞİK DEVLETLERİ, 23 Şubat 2025
BAŞÇETİN ATAÇ,HASÖZDEMİR KÜRŞAT,DÖNMEZ HÜSEYİN ONUR,ÇELT HASAN
|
Flexible Computer Based Control of Ignition and Injection Units of a Gasoline Engine with Skip Cycle Mechanism
Machines Technologies Materials, International Virtual Journal for Science, Techniques and Innovations for the Industry, Vol. 6, No. 1, Ocak 2013, s. 33-38, ISSN: 1313-0226
DOĞRU BARIŞ,BAYKARA CEMAL,KUTLAR OSMAN AKIN,ARSLAN HİKMET
|
Modelling of plasma rotation accounting for neutral beam injection and perturbation coils in JET and TEXTOR
NUCLEAR FUSION, Vol. 44, No. 6, Ocak 2004, ISSN: 0029-5515
NİCOLAİ ALBERT, DAYBELGE UMUR, YARIM CUMA
|
Efficiency comparison of conformal cooling channels produced by additive and subtractive manufacturing in automotive industry plastic injection moulds: a hybrid application
The International Journal of Advanced Manufacturing Technology, Vol. 126, Nisan 2023, s. 4419-4437, ISSN: 0268-3768
ÇALIŞKAN CEMAL İRFAN, KOCA ALİİHSAN, ÖZER GÖKHAN, BAKIR SONER
|
Thermal Well Test Analysis in Steam Injection Process
Türkiye 20. Uluslararası Petrol ve Doğal Gaz Kongre ve Sergisi, 27 Mayıs 2015
AİAN ELNAZ GHAFOURİ,TÜREYEN ÖMER İNANÇ,SATMAN ABDURRAHMAN
|
Pressure and Temperature Behaviors of Single Phase Liquid Water Geothermal Reservoirs under Various Production Injection Schemes
World Geothermal Congress 2015, 19 Nisan 2015
PALABIYIK YILDIRAY,TÜREYEN ÖMER İNANÇ,ONUR MUSTAFA
|
The Effects of Injection Parameters on Silafont-36 Cast Part in HPDC Process
10. Uluslararası Alüminyum Sempozyumu, İstanbul/TÜRKİYE, 3 Mart 2022
SAVAŞKAN BERKAY, MUTLU MUAMMER, HASPOLAT SEYFETTİN, KELEŞ ÖZGÜL
|
Flexible Computer Based Control of Ignition and Injection Units of a Gasoline Engine with Skip Cycle Mechanism
Machines Technologies and Materials, No. 6, Haziran 2013, s. 33-38, ISSN: 1313-0226
TEKELİ ÖZGÜR, DOĞRU BARIŞ, BAYKARA CEMAL, KUTLAR OSMAN AKIN , ARSLAN HİKMET
|
Flexible Computer Based Control of Ignition and Injection Units of a Gasoline Engine with Skip Cycle Mechanism
21.Uluslararası TransMotauto’13 Konferansı, Varna/BULGARİSTAN, No. 6, 1 Temmuz 2013, s. 33-38, ISSN: 1313-0226
DOĞRU BARIŞ,KUTLAR OSMAN AKIN,BAYKARA CEMAL,ARSLAN HİKMET,GÜNKAN FIRAT MEHMET,TEKELİ ÖZGÜR
|
Experimental Investigation of Processing Temperature Effect on Adhesive Bond Strength Between Engineering Thermoplastics in the Plastic Injection Molding Process
Journal of Manufacturing Science and Engineering, Vol. 146, Temmuz 2024, ISSN: 1087-1357
ÖZEL ALİ,SÖYLEMEZ EMRECAN
|