Influence of Casing Roughness on the Aerodynamic Structure of Tip Vortices in an Axial Flow Turbine
Volume 6: Turbomachinery, Parts A and B, Barcelona/İSPANYA, Vol. 6, 6 Mayıs 2006, s. 893-903
RAO NİKHİL,GÜMÜŞEL BARIŞ,KAVURMACIOĞLU LEVENT ALİ,CAMCİ CENGİZ
|
Image Recovery of Inaccessible Rough Surfaces Profiles Having Impedance Boundary Condition
IEEE GEOSCIENCE AND REMOTE SENSING LETTERS, Vol. 19, Ocak 2022, s. 5, ISSN: 1545-598X
SEFER AHMET, YAPAR ALİ
|
CNN-Based Deep Learning Architecture for Electromagnetic Imaging of Rough Surface Profiles
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, Vol. 70, No. 10, Ocak 2022, s. 12, ISSN: 0018-926X
AYDIN İZDE, BUDAK GÜVEN, SEFER AHMET, YAPAR ALİ
|
The effect of zirconia thickness on the biaxial flexural strength of zirconia-ceramic bilayered discs
DENTAL MATERIALS JOURNAL, Vol. 34, No. 5, 2015, s. 640-647, ISSN: 0287-4547
GÜLMEZ TURGUT,TARCİN BİLGE,DEMİRBAS BULENT,SİNMAZİSİK GULDEN
|
Prediction of maximum spreading factor after drop impact: Development of a novel semi-analytical model incorporating effect of surface roughness
Colloid and Interface Science Communications, Vol. 41, Ocak 2021, ISSN: 2215-0382
BUDAKLI METE
|
Determining the roughness angles of surfaces using laser scanners
FIG Working Week & 6th National Congress of ONIGT, Marrakech, Morrocco/FAS, 18 Mayıs 2011, s. 1-10
KAYA ŞİNASİ,BOZKURTOĞLU ERKAN,AVŞAR ÖZGÜR,AYDAR UMUT,ŞEKER DURSUN ZAFER
|
Determination of Tool Wear, Surface Roughness and Cutting Temperature Parameters in Milling St37 Steel
7th International Conference on Engineering Technologies (ICENTE), KONYA/TÜRKİYE, 23 Kasım 2023, s. 233-237
DEĞİRMENCİ ÜNAL, USCA ÜSAME ALİ, ŞAP SERHAT
|
On the surface roughness of 316L stainless steel fabricated using L-PBF additive manufacturing
NORTRIB 2024, Copenhagen/DANİMARKA, Vol. 41, 11 Haziran 2024, s. 54-56
YILDIZ RAŞİD AHMED,ÖZDOĞAN CANSIN,MALEKAN MOHAMMAD
|
Experimental investigation of surface roughness effects on the flow boiling of R134a in microchannels
Experimental Thermal and Fluid Science, Aralık 2016
JAFARI RAHIM,OKUTUCU ÖZYURT HANİFE TUBA,BAYER ÖZGÜR,ÜNVER HAKKI ÖZGÜR
|
Modeling and analysis of surface roughness of microchannels produced by μ-WEDM using an ANN and Taguchi method
Journal of Mechanical Science and Technology, Vol. 31, Kasım 2017, s. 5447-5457, ISSN: 1738-494X
JAFARI RAHIM,KAHYA MÜGE,NADİMİ BAVİL OLİAEİ SAMAD,ÜNVER HAKKI ÖZGÜR,OKUTUCU ÖZYURT HANİFE TUBA
|
A numerical algorithm to determine straightness error surface roughness and waviness measured using a fiber optic interferometer
Optics and Laser Technology, Kasım 2016
YILDIRIM MURAT,OKUTUCU ÖZYURT HANİFE TUBA,DURSUNKAYA ZAFER
|
Numerical Simulation of the Surface Roughness Effect on Flow Boiling in Microchannels
Int. Symp. on Convective Heat and Mass Transfer, 8 Haziran 2014
JAFARI RAHIM,OKUTUCU ÖZYURT HANİFE TUBA
|
Fatigue Strength Of An Urban Type Midi Bus Vehicle Chassis By Using Fem Analysis And Accelerated Fatigue Life Test
SAE 2009 World Congress, Detroit/AMERİKA BİRLEŞİK DEVLETLERİ, No. 45, 20 Nisan 2009, s. 67, ISSN: 0148-7191
YAY KUBİLAY,EREKE İSMAİL MURAT
|
The effect of surface roughness on laminar separated boundary layers
Journal of Turbomachinery, Vol. 136, No. 3, Mart 2014, s. 31014, ISSN: 0889-504X
MARK P SİMENS,GÜNGÖR AYŞE GÜL
|
Correlation of frictional drag and roughness length scale for transitionally and fully rough turbulent boundary layers
Ocean Engineering, Vol. 107, Ekim 2015, s. 283-298, ISSN: 00298018
ÜNAL UĞUR ORAL
|
Boundary layer drag and surface roughness characteristics of nanostructured coatings on an axy symmetrical slender body tested in a cavitation tunnel
15. International Congress on Marine Corrosion and Fouling, 25 Haziran 2010, s. 4
ÜNAL UĞUR ORAL,ÜNAL BURCU,POLİTİS GEORGİOS,ATLAR MEHMET
|
Boundary layer and surface roughness measurements of nanostructured anti fouling coatings on flat plates
SMOOTH-Ships, 20 Mayıs 2010, s. 73-80
ÜNAL BURCU,ÜNAL UĞUR ORAL,GEORGİOS POLİTİS,RODERİCK SAMPSON,ATLAR MEHMET
|
Investigating the Effects of Bed Roughness on Incipient Motion in Rigid Boundary Channels with Developed Hybrid Geno-Fuzzy versus Neuro-Fuzzy Models
GEOTECHNICAL AND GEOLOGICAL ENGINEERING, Vol. 39, No. 4, Nisan 2021, s. 3171-3191, ISSN: 0960-3182
BİZİMANA HUSSEİN, ALTUNKAYNAK ABDÜSSELAM
|
Effects of fractal surface roughness and lithology on single and multiphase flow in a single fracture An experimental investigation
International Journal of Multiphase Flow, Vol. 68, 2015, ISSN: 0301-9322
BABADAĞLI TAYFUN,REN XİAOJUAN,DEVELİ KAYHAN
|
Effect of surface roughness and lithology on the water gas and water oil relative permeability ratios of oil wet single fractures
International Journal of Multiphase Flow, Vol. 75, 2015, ISSN: 0301-9322
BABADAĞLI TAYFUN,RAZA SYED,REN XİAOJUAN,DEVELİ KAYHAN
|