The Effect of Nitriding On High Temperature Wear Resistance of High Speed Tool Steels
2nd International Iron and Steel Symposium, 1 Nisan 2015
BOSTAN BURCU,AMİR MOTALLEBZADEH,ATAR ERDEM,ÇİMENOĞLU HÜSEYİN
|
Surface Modification of Co-Based Stellite 6 Hardfacings by Laser Surface Melting: Microstructural Evaluation and Reciprocating Wear Resistance
UDCS’xx19 Fourth International Iron and Steel Symposium, 4 Nisan 2019
ALHATTAB ALİ ABDUL MUNİM,DİLAWARY SHAİKH ASAD,MOTALLEBZADEH AMİR,ARISOY CEVAT FAHİR,ÇİMENOĞLU HÜSEYİN
|
Effect of nitriding on surface characteristicsand high temperature wear behaviour of inconel 718 superalloy
4TH INTERNATIONAL IRON AND STEEL SYMPOSIUM, 4 Nisan 2019
TURAN TUNCAY,GÜLERYÜZ HASAN,ÇİMENOĞLU HÜSEYİN
|
A comparison of workability and mechanical properties of normal and lightweight SCC mixtures with and without steel fibers
SCC 2008: Challenges and Barriers to Application: The 3th North American Conference on the Design and Use of SCC, 1 Kasım 2008
TASDEMİR MEHMET ALİ,ATAHAN HAKAN NURİ,GÖKALP İSMAİL,YERLİKAYA MEHMET
|
Synergistic Effects of Micro & Nano-Silica on the Bond Properties Between Reinforcing Steel and Concrete: Evaluation of Bond Strength and Slip Energy
14th International Conference on Advances in Civil Engineering, ACE 2021, İSTANBUL/TÜRKİYE, 6 Eylül 2021, s. 141-148
BOYACI BÜŞRA, TÜRKMENOĞLU HASAN NURİ, BIÇAKÇI SİDAR NİHAT, BARAN ŞERVAN, ATAHAN HAKAN NURİ
|
A Laser-Machined Stainless-Steel Micro-Scanner for Confocal Microscopy
Eurosensors, 3 Eylül 2017
OYMAN HİLMİ ARTUN,İÇEL MUSTAFA AKIN,EFE BARIŞ CAN,GÖKDEL YİĞİT DAĞHAN,FERHANOĞLU ONUR,YALÇINKAYA ARDA DENİZ
|
A stainless-steel micro-scanner for rapid 3D confocal imaging
Journal of Physics D: Applied Physics, Vol. 52, No. 30, Temmuz 2019, s. 305101, ISSN: 0022-3727
OYMAN HİLMİ ARTUN,EFE BARIŞ CAN,İÇEL MUSTAFA AKIN,GÖKDEL YİĞİT DAĞHAN,FERHANOĞLU ONUR,YALÇINKAYA ARDA DENİZ
|
The Effect of Radiation on Low Cycle Fatique Behaviour of a Stainless Steel
4th General Conference of the Balkan Physical Union, Veliko Turnova/BULGARİSTAN
DOĞAN N., BAYDOGAN M., TUĞRUL A.B., CİMENOGLU H.,
|
The Effect of Low Temperature Nitriding on Wear and Corrosion Properties of AISI P20 Tool Steel
1st International Surface Treatment Symposium, İstanbul/TÜRKİYE
AKÇAKESE O., ÇELİK Ö., ÇİMENOĞLU H.
|
POST WELD HEAT TREATMENT APPLIED in EXAMINING THE MECHANICAL PROPER TIES of 13CrMo4 5 and X10CrMoVNb9 1 GRADE STEEL
IMSTEC 2016, 6 Nisan 2016
KIRBAS CANER,ÇİÇEK BÜNYAMİN,BAYDOĞAN NİLGÜN,ÇİMENOĞLU HÜSEYİN
|
Effect of Nitriding and PVD CrN Coating on the Wear Performance of an AISI D2 Tool Steel
1st International Surface Treatment Symposium, İstanbul/TÜRKİYE
ALPASLAN. Ö., ÇELİK Ö., ATAR E., ÇİMENOĞLU H.
|
Seismic Retrofit of Rc Buildings with Viscous Dampers and Elastic Steel Frames Including Effect of Composite Behavior
AIJ Structural Engineering Journal, Vol. 67, No. 67, Mart 2021, s. 569-580, ISSN: 0267-7261
PANUMAS SAINGAM, SÜTCÜ FATİH, YUKİ TERAZAWA, ÇELİK OĞUZ CEM, TAKEUCHİ TORU
|
CYCLIC LOADING TESTS OF SUB STANDARD RC FRAMES RETROFITTED WITH BUCKLING RESTRAINED BRACES AND ELASTIC STEEL FRAMES
Journal of Structural and Construction Engineering (Transactions of AIJ), Vol. 81, No. 727, Eylül 2016, s. 1575-1584, ISSN: 1340-4202
FUJISHITA KAZUHIRO,BAL AHMET,SÜTCÜ FATİH,RYOTA MATSUI,TERASHIMA MASAO,ÇELİK OĞUZ CEM,TAKEUCHI TORU
|
Experimental and analytical studies of sub-standard RC frames retrofitted with buckling-restrained braces and steel frames
Bulletin of Earthquake Engineering, Vol. 18, No. 5, Mart 2020, s. 2389-2410, ISSN: 1570-761X
SÜTCÜ FATİH,BAL AHMET,FUJİSHİTA KAZUHİRO,RYOTA MATSUİ,ÇELİK OĞUZ CEM,TAKEUCHİ TORU
|
RESPONSE EVALUATION OF BRB RETROFIT IN RC BUILDINGS BY CONSIDERING THE COMPOSITE EFFECT OF ELASTIC STEEL FRAME
AIJ Journal of Technology and Design, Vol. 23, No. 53, Ocak 2017, s. 147-152, ISSN: 1341-9463
KAZUHİRO FUJİSHİTA,RYOTA MATSUİ,SÜTCÜ FATİH,TAKEUCHİ TORU
|
Cyclic Loading Tests of Sub standard RC Frames Retrofitted with Buckling Restrained Braces and Elastic Steel Frames Part 1
Architectural Institute of Japan(AIJ) Annual Conference 2016, FUKUOKA/JAPONYA, 24 Ağustos 2016
SÜTCÜ FATİH,FUJISHITA KAZUHIRO,BAL AHMET,MATSUI RYOTA,TERASHIMA MASAO,ÇELİK OĞUZ CEM,TAKEUCHI TORU
|
Seismic Retrofit for RC Buildings Using Elasto-Plastic and Viscous Dampers Implemented with Elastic Steel Frames
17th World Conference on Earthquake Engineering - 17WCEE, SENDAI/JAPONYA, 13 Eylül 2021
PANUMAS SAINGAM, TAKEUCHİ TORU, SÜTCÜ FATİH, YUKİ TERAZAWA, LİN PAO CHUN
|
Cyclic Loading Tests of Sub standard RC Frames Retrofitted with Buckling Restrained Braces and Elastic Steel Frames Part 2
Architectural Institute of Japan(AIJ) Annual Conference 2016, FUKUOKA/JAPONYA, 24 Ağustos 2016
FUJISHITA KAZUHIRO,BAL AHMET,SÜTCÜ FATİH,MATSUI RYOTA,TERASHIMA MASAO,ÇELİK OĞUZ CEM,TAKEUCHI TORU
|
Response Control of Retrofitted RC Frame with Viscous Braced Damper and Closed Steel Frames Including Effect of Composite Behavior
Architectural Institute of Japan (AIJ) Annual Conference 2021, TOUKAI/JAPONYA, 5 Eylül 2021
PANUMAS SAINGAM, SÜTCÜ FATİH, YUKİ TERAZAWA, ÇELİK OĞUZ CEM, TAKEUCHİ TORU
|
Composite behavior in RC buildings retrofitted using buckling-restrained braces with elastic steel frames
Engineering Structures, Vol. 219, Eylül 2020, s. 110896, ISSN: 0141-0296
PANUMAS SAINGAM,SÜTCÜ FATİH,TERAZAWA YUKİ,FUJİSHİTA KAZUHİRO,LİN PAO CHUN,ÇELİK OĞUZ CEM,TAKEUCHİ TORU
|