Collapse characterization of cold-formed steel beams
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2013
DENİZ AYHAN
|
Design of a stainless steel composite bridge according to the eurocodes and cost analysis
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2014
TİJEN BAYER
|
Fatigue analysis of simple span riveted steel raiway bridges
Deprem Mühendisliği ve Afet Yönetimi Enstitüsü, İstanbul Teknik Üniversitesi, 2019
AYLİN ERTİK
|
Effect of laser surface hardening parameters on impact sliding wear behavior of a hot work tool steel
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2019
ELİF NÖBET
|
Fragility evaluation of steel truss railway bridges in Turkey
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2017
SEDA KONOR
|
Repassivation/depassivation kinetics of 316L stainless steel in reciprocating sliding contacs
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2008
GÖKHAN BÜYÜKSARI
|
Effect of low temperature nitriding on the impact sliding wear behavior of an austenitic stainless steel
Lisansüstü Eğitim Enstitüsü, İstanbul Teknik Üniversitesi, 2021
TUFAN GÜMÜŞLÜ
|
Elevated Temperature Wear Behavior of Paste Borided 42CrMo4 and X20Cr13 Steels
2nd International Iron and Steel Symposium, 1 Nisan 2015
MOTALLEBZADEH AMİR,DİLEKTAŞLI EMRE,BAYDOĞAN MURAT,ATAR ERDEM,ÇİMENOĞLU HÜSEYİN
|
POST WELD HEAT TREATMENT APPLIED in EXAMINING THE MECHANICAL PROPER TIES of 13CrMo4 5 and X10CrMoVNb9 1 GRADE STEEL
IMSTEC 2016, 6 Nisan 2016
KIRBAS CANER,ÇİÇEK BÜNYAMİN,BAYDOĞAN NİLGÜN,ÇİMENOĞLU HÜSEYİN
|
Impact-Sliding Wear Behaviour of Nitrided H13 Steel Tool Steels
33rd International Conference on Surface Modification Technologies, 26 Haziran 2019
AKYILDIZ EZGİ,ALTAY MERT,MUHAFFEL FAİZ,ÖZKURT SEÇKİN,ATAR ERDEM,ÇİMENOĞLU HÜSEYİN
|
A stainless-steel micro-scanner for rapid 3D confocal imaging
Journal of Physics D: Applied Physics, Vol. 52, No. 30, Temmuz 2019, s. 305101, ISSN: 0022-3727
OYMAN HİLMİ ARTUN,EFE BARIŞ CAN,İÇEL MUSTAFA AKIN,GÖKDEL YİĞİT DAĞHAN,FERHANOĞLU ONUR,YALÇINKAYA ARDA DENİZ
|
A Laser-Machined Stainless-Steel Micro-Scanner for Confocal Microscopy
Eurosensors, 3 Eylül 2017
OYMAN HİLMİ ARTUN,İÇEL MUSTAFA AKIN,EFE BARIŞ CAN,GÖKDEL YİĞİT DAĞHAN,FERHANOĞLU ONUR,YALÇINKAYA ARDA DENİZ
|
A comparison of workability and mechanical properties of normal and lightweight SCC mixtures with and without steel fibers
SCC 2008: Challenges and Barriers to Application: The 3th North American Conference on the Design and Use of SCC, 1 Kasım 2008
TASDEMİR MEHMET ALİ,ATAHAN HAKAN NURİ,GÖKALP İSMAİL,YERLİKAYA MEHMET
|
Synergistic Effects of Micro & Nano-Silica on the Bond Properties Between Reinforcing Steel and Concrete: Evaluation of Bond Strength and Slip Energy
14th International Conference on Advances in Civil Engineering, ACE 2021, İSTANBUL/TÜRKİYE, 6 Eylül 2021, s. 141-148
BOYACI BÜŞRA, TÜRKMENOĞLU HASAN NURİ, BIÇAKÇI SİDAR NİHAT, BARAN ŞERVAN, ATAHAN HAKAN NURİ
|
Low Cycle Fatigue Behaviour of Irradiated Stainless Steel As ShieldingMaterial
International Congress on the Advances in NuclearPower Plants (ICAPP '06), Reno, NV/AMERİKA BİRLEŞİK DEVLETLERİ, 4 Haziran 2006, s. 2101-2104
BAYDOĞAN N.D., BAYDOĞAN M., TUGRUL A.B., ÇİMENOĞLU H.
|
Investigation on cyclic deformation behaivour of reinforced steel bars
11th. International Conference on Fracture, Turin/İTALYA, 20 Mart 2005
BAYDOGAN M., UYSAL A., KAYALİ E.S., CİMENOGLU H.
|
The Novel Conductive Heating Technique for Steel Sheets prior to Die Quenching
uenching5th International Conference on Diffusion in Soli,ds and Liquids, Roma/İTALYA, 24 Haziran 2009
OZCAN I., LİVATYALI H., BAYDOGAN M., CİMENOĞLU H.
|
Effect of Nitriding and PVD CrN Coating on the Wear Performance of an AISI D2 Tool Steel
1st International Surface Treatment Symposium, İstanbul/TÜRKİYE
ALPASLAN. Ö., ÇELİK Ö., ATAR E., ÇİMENOĞLU H.
|
Impact Sliding Wear Performances of Quenched and Tempered Hot Work Tool Steels
UDCS’xx19 Fourth International Iron and Steel Symposium, karabük/TÜRKİYE, 4 Nisan 2019
AKYILDIZ EZGİ,MUHAFFEL FAİZ,ALTAY MERT,ÖZKURT SEÇKİN,ATAR ERDEM,ÇİMENOĞLU HÜSEYİN
|
Friction behavior of graphene on polished steel surfaces
DPG Spring Meetings, BERLİN/ALMANYA, 11 Mart 2018, s. 2-2
ÖZKAN DOĞUŞ,KINCAL CEM,SULUKAN EGEMEN,ERARSLAN YAMAN,YAĞCI MUSTAFA BARIŞ,GÜRLÜ OĞUZHAN
|