Effects of NCO/OH Ratio and Reactive Diluent Type on the Adhesion Strength of Polyurethane Methacrylates for Cord/Rubber Composites
Polymer-Plastics Technology and Engineering, Vol. 57, No. 10, Mayıs 2018, s. 935-944, ISSN: 0360-2559
YILDIZ ZEHRA, ÖNEN HACER AYŞEN, GÜNGÖR ATİLLA, WANG YOUJİANG, JAKOB KARL
|
Improvement of mechanical strength of iron ore pellets using raw and activated bentonites as binders
Physicochemical Problems of Mineral Processing, Vol. 51, No. 1, Şubat 2015, s. 23-26
GÜL ALİM,SİRKECİ AYHAN ALİ,BOYLU FERİDUN,GULDAN GUNSAR,BURAT FIRAT
|
Development of a failure strain surface in average stress triaxiality and average lode angle domains of a low temperature high strength steel
Marstruct, 25 Mart 2015
CHOUNG JOONMO,PARK SJ,TAYYAR GÖKHAN TANSEL
|
Structural strength scaling law for fracture of plastic-hardening metals and testing of fracture properties
Extreme Mechanics Letters, Vol. 43, No. 2021, Şubat 2021, s. 101141, ISSN: 2352-4316
NGUYEN HOANG T., DÖNMEZ AHMET ABDULLAH, BAZANT ZDENEK P.
|
Strength and elastic properties of low-fine self compacting concretes designed with nano SiO2
2nd International Conference on Structural Engineering, New Technology and Methods (ICSENM’17), 2 Nisan 2017
DURGUN MUHAMMED YASİN,ATAHAN HAKAN NURİ
|
Comparison of Post-Failure Strength of Micro-cracked Marble with Hoek-Brown Failure Criterion
Pamukkale University Journal of Engineering Sciences, Vol. 26, No. 8, Ocak 2020, s. 1365-1372, ISSN: 1300-7009
MAHMUTOĞLU YILMAZ,ŞANS GÖKHAN
|
Adhesion strength behaviour of plasma pre treated and laminated polypropylene nonwoven fabrics using acrylic and polyurethane based adhesives
Journal of Industrial Textiles, Vol. 43, No. 3, Mart 2014, s. 396-414, ISSN: 1528-0837
ARMAĞAN OSMAN GAZİ,KARAGÜZEL KAYAOĞLU BURÇAK,KARAKAŞ HALE,GÜNER FATMA SENİHA
|
Fibre Volume Ratio Effect on the Crack Bridging Mechanism in Uniaxial Reinforced Ceramic Composites
Thirteenth International Conference on the Strength of Materials ICSMA-13, Vol. 387389, 25 Ağustos 2003, s. 882-886
ERGÜN HALE,BODUROĞLU MEHMET HASAN
|
On the frother's strength and its performance
Minerals Engineering, Vol. 171, No. 1, Eylül 2021, s. 1-10, ISSN: 0892-6875
KARAKASHEV STOYAN I., GROZEV NİKOLAY A., ÖZDEMİR ORHAN, BATJARGAL KHANDJAMTS, GÜVEN ONUR, ATA SEHER, BOURNEVAL GHİSLAİN, BOYLU FERİDUN, ÇELİK MEHMET SABRİ
|
Residual load bearing capacity and failure mechanism of impacted high-strength reinforced concrete shear beams
Engineering Failure Analysis, Vol. 121, Ocak 2021, ISSN: 1350-6307
DOK GÖKHAN, ÇAĞLAR NACİ, YILMAZ CEMAL, İLKİ ALPER
|
Influence of Aggregate Type on the Mechanical Behaviour of Normal and High Strength Concretes
ACI Materials Journal, Vol. 99, No. 6, 2002, s. 528-533
OZKAN SENGUL, CANAN TASDEMIR, MEHMET ALI TASDEMIR
|
Compressive Strength and Rapid Chloride Permeability of Concretes with Ground Fly Ash and Slag
Journal of Materials in Civil Engineering, Vol. 21, No. 9, 2009, s. 494-501, ASCE
OZKAN SENGUL AND MEHMET A. TASDEMIR
|
Effect of Ionic Crosslinking on Breaking Strength and Elongation of Cotton Fabric
Textile Research Journal, 2009, s. accepted for publication
UMUT KIVANC SAHIN , NEVIN CIGDEM GURSOY , PETER HAUSER
|
Anaerobic dynamic membrane bioreactors for high strength wastewater treatment
13th IWA World Congress of Anaerobic Digestion, 2013
M.E. ERSAHIN, J.B. GIMENEZ, H. OZGUN, Y. TAO, J.B. VAN LIER
|
Influence of Aggregate Type on the Mechanical Behaviour of Normal and High Strength Concretes
ACI Materials Journal, Vol. 99, No. 6, 2002, s. 528-533
OZKAN SENGUL, CANAN TASDEMIR, MEHMET ALI TASDEMIR
|
Compressive Strength and Rapid Chloride Permeability of Concretes with Ground Fly Ash and Slag
Journal of Materials in Civil Engineering, Vol. 9, No. 21, 2009, s. 494-501, ASCE
, OZKAN SENGUL AND MEHMET A. TASDEMIR
|
IMPROVEMENT OF MECHANICAL STRENGTH OF IRON ORE PELLETS USING RAW AND ACTIVATED BENTONITES AS BINDERS
PHYSICOCHEMICAL PROBLEMS OF MINERAL PROCESSING, Vol. 51, No. 1, 2015, s. 23-36, ISSN: 1643-1049
GÜL ALİM,SİRKECİ AYHAN ALİ,BOYLU FERİDUN,GÜNSER GÜLDAN,BURAT FIRAT
|
Bioactivity characterization and a full factorial design on the adhesive strength of air plasma sprayed HA TiO2 coated Ti
Journal of the Australian Ceramic Society, Vol. 49, No. 2, Temmuz 2013, s. 95-103, ISSN: 0004-881X
ZÜMRÜT ZEYNEP,POLAT BİLLUR DENİZ,AKIN İPEK,KELEŞ ÖZGÜL,GÖLLER GÜLTEKİN
|
An Artificial Neural Network Model for Prediction of Bursting Strength of Knitted Fabrics
International Conference on Machine Learning and Computer Science, 11 Ağustos 2012
BAHADIR M CAGATAY,KURŞUN BAHADIR SENEM,KALAOĞLU FATMA
|
Membrane integrated process for advanced treatment of high strength Opium Alkaloid wastewaters
Water Science and Technology, Vol. 77, No. 7, Nisan 2018, s. 1899-1908, ISSN: 0273-1223
İNSEL HAYRETTİN GÜÇLÜ,KARAGÜNDÜZ AHMET,AKSEL MURAT,ÇOKGÖR EMİNE,KOR BIÇAKCI GÖKÇE,ÖZYILDIZ GÖKŞİN,TORÖZ İSMAİL,KESKİNLER BÜLENT
|