Synthesis of LaB6–Al2O3 nanocomposite powders via ball milling-assisted annealing
Journal of Materials Science, Vol. 53, No. 19, Ekim 2018, s. 13538-13549, ISSN: 0022-2461
TEKOĞLU EMRE,İMER CEREN,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Influence of the milling process on TiB2 particle reinforced Al-7 wt. Si matrix composites
Materials Testing, Vol. 60, Temmuz 2018, s. 719-726, ISSN: 0025-5300
MERTDİNÇ SIDDIKA,TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Effects of reinforcement content and sequential milling on the microstructural and mechanical properties of TiB2 particulate-reinforced eutectic Al-12.6 wt Si composites
Journal of Materials Science, Vol. 53, No. 4, Şubat 2018, s. 2537-2552, ISSN: 0022-2461
TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,MERTDİNÇ SIDDIKA,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Synthesis and characterization of graphite-encapsulated iron nanoparticles from ball milling-assisted low-pressure chemical vapor deposition
Carbon, Vol. 124, Kasım 2017, s. 170-179, ISSN: 00086223
AĞAOĞULLARI DUYGU,MADSEN STEVEN J,ÖGÜT BURCU,KOH Aİ LEEN,SİNCLAİR ROBERT
|
In situ synthesis of NbB2–NbC composite powders by milling-assisted carbothermal reduction of oxide raw materials
Advanced Powder Technology, Vol. 26, No. 4, Temmuz 2015, s. 1200-1209, ISSN: 09218831
BALCI ÖZGE,AĞAOĞULLARI DUYGU,OVALI DÖNDAŞ DİDEM,ÖVEÇOĞLU MUSTAFA LUTFİ,DUMAN İSMAİL
|
Effect of Milling Time and the Consolidation Process on the Properties of Al Matrix Composites Reinforced with Fe-Based Glassy Particles
Metals, Vol. 5, No. 2, Haziran 2015, s. 669-685, ISSN: 2075-4701
BALCI ÖZGE,PRASHANTH KONDA,SCUDİNO SERGİO,AĞAOĞULLARI DUYGU,DUMAN İSMAİL,ÖVEÇOĞLU MUSTAFA LUTFİ,UHLENWİNKEL VOLKER,ECKERT JUERGEN
|
Effect of tungsten disilicide addition on tungsten boride based composites produced by milling-assisted pressureless sintering
Bor Dergisi, Vol. 3, No. 1, Mart 2018, s. 42-50, ISSN: 2149-9020
OVALI DÖNDAŞ DİDEM,AĞAOĞULLARI DUYGU,GÖKÇE HASAN,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Characterization Investigations of NbB2/NbC Particulate Reinforced Al-7 Wt. SiComposites Synthesized via Various Milling Processes and Pressureless Sintering
IMMC 2018 19th InternationalMetallurgyand Materials25/27 October Congress, 25 Ekim 2018
MERTDİNÇ SIDDIKA,TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Characterization Investigations of a Al-5 wt Si 2 wt. (NbB2, NbC) Hybrid Composite Fabricated via Mechanical Alloying and Sequentially Milling (Mechanical AlloyingCryomilling)
ICAFM 2017, Los Angles/AMERİKA BİRLEŞİK DEVLETLERİ, 4 Ağustos 2017
ÖVEÇOĞLU MUSTAFA LUTFİ,TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,AĞAOĞULLARI DUYGU
|
EFFECT OF SEQUENTIAL MILLING (MECHANICAL ALLOYING-CRYOGENICMILLING) ON THE MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF TIB2REINFORCED AL-12.6 WT. SI MMCS
BRAMAT 2017, Brasov/ROMANYA, 7 Mart 2017, s. 119
TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
MEASUREMENT OF THE MILLING AND GRINDING INDUCED RESIDUAL STRESSES ON BULK METALLIC GLASS BY USING HOLE DRILLING METHOD
9th International Congress on Machining, Antalya, Türkiye,, Antalya/TÜRKİYE, 8 Kasım 2018
YÜCEL AYSU HANDE, BAKKAL MUSTAFA
|
Effects of grinding media shape in milling of ceramic raw materials
XIV. International Mineral Processing Symposium & Exhibition, 15 Ekim 2014
KAYACI KAĞAN,YILDIRIM YILDIZ,ALTINTAŞ ALİ,KILIÇ MERT,DURGUT EMRAH,YİĞİT PALA ÇİĞDEM,ERGİN HASAN
|
Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt. Si-10 wt. TiB2 composites produced by sequential milling and pressureless sintering
International Journal of Materials Research, Vol. 110, No. 11, Kasım 2019, s. 1047-1057, ISSN: 1862-5282
TEKOĞLU EMRE,YÜREKTÜRK YAKUP,AĞAOĞULLARI DUYGU,SHAIKD ASAD ALI DILAWARY,BAYDOĞAN MURAT,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Cutting Mechanics of Bulk Metallic Glass Materials on Meso End Milling
Materials and Manufacturing Processes, Vol. 24, No. 12, Aralık 2009, s. 1249-1255, ISSN: 1042-6914
BAKKAL MUSTAFA,NAKŞİLER VELİ
|
MEASUREMENT OF THE MILLING AND GRINDING INDUCED RESIDUAL STRESSES ON BULK METALLIC GLASS BY USING HOLE DRILLING METHOD9. Ulul
9. Uluslararası Talaşlı İmalat Sempozyumu, 8 Kasım 2018
YEŞİLOVA AYSU HANDE,AKDENİZ YÜKSEL,ÜNLÜ EMRE,TİMUR AZMİ,BAKKAL MUSTAFA
|
Modeling and measurement of cutting temperatures in milling
7th HPC 2016 – CIRP Conference on High Performance Cutting, Vol. 46, 31 Mayıs 2016, s. 173-176
BUDAK ERHAN,KARAGÜZEL UMUT,BAKKAL MUSTAFA
|
Improving performance of turn milling by controlling forces and thermally induced tool center point TCP displacement
13th Global Conference on Sustainable Manufacturing: Decoupling Growth from Resource Use, 16 Eylül 2015
MI PUTZ,SI IHLENFELDT,KARAGÜZEL UMUT,UL SEMMLER,BUDAK ERHAN,BAKKAL MUSTAFA,RU WERTHEIM
|
Modeling and Measurement of Cutting Temperatures in Milling
Procedia CIRP, Vol. 46, Ocak 2016, s. 173-176, ISSN: 22128271
BUDAK ERHAN,KARAGÜZEL UMUT,BAKKAL MUSTAFA
|
Mechanical and Thermal Modeling of Orthogonal Turn-milling Operation
Procedia CIRP, Vol. 58, Ocak 2017, s. 287-292, ISSN: 22128271
KARAGÜZEL UMUT,BAKKAL MUSTAFA,BUDAK ERHAN
|
Effects of tool axis offset in turn milling process
Journal of Materials Processing Technology, Vol. 231, Mayıs 2016, s. 239-247, ISSN: 09240136
KARAGÜZEL UMUT,UYSAL EMRE,BUDAK ERHAN,BAKKAL MUSTAFA
|