ARAMA SONUÇLARI

Toplam 75 adet sonuçtan 20 tanesi görüntülenmektedir.

Arama









Yıllara göre arama

Özel Aralık Girişi

Effect of Ambient and Cryogenic Milling on the Microstructure and Properties of Tungsten Matrix Composites Fabricated by Activated Sintering
Cumhuriyet Science Journal, Vol. 40, No. 1, Mart 2019, s. 204-212, ISSN: 2587-2680
BALCI ÖZGE,AĞAOĞULLARI DUYGU,SOMER MEHMET SUAT,ÖVEÇOĞLU MUSTAFA LUTFİ
Synthesis and characterization of graphite-encapsulated iron nanoparticles from ball milling-assisted low-pressure chemical vapor deposition
Carbon, Vol. 124, Kasım 2017, s. 170-179, ISSN: 00086223
AĞAOĞULLARI DUYGU,MADSEN STEVEN J,ÖGÜT BURCU,KOH Aİ LEEN,SİNCLAİR ROBERT
Duygu Ağaoğulları Özgün Makale
Effect of tungsten disilicide addition on tungsten boride based composites produced by milling-assisted pressureless sintering
Bor Dergisi, Vol. 3, No. 1, Mart 2018, s. 42-50, ISSN: 2149-9020
OVALI DÖNDAŞ DİDEM,AĞAOĞULLARI DUYGU,GÖKÇE HASAN,ÖVEÇOĞLU MUSTAFA LUTFİ
Duygu Ağaoğulları Özgün Makale
Effect of Milling Time and the Consolidation Process on the Properties of Al Matrix Composites Reinforced with Fe-Based Glassy Particles
Metals, Vol. 5, No. 2, Haziran 2015, s. 669-685, ISSN: 2075-4701
BALCI ÖZGE,PRASHANTH KONDA,SCUDİNO SERGİO,AĞAOĞULLARI DUYGU,DUMAN İSMAİL,ÖVEÇOĞLU MUSTAFA LUTFİ,UHLENWİNKEL VOLKER,ECKERT JUERGEN
Duygu Ağaoğulları Özgün Makale
In situ synthesis of NbB2–NbC composite powders by milling-assisted carbothermal reduction of oxide raw materials
Advanced Powder Technology, Vol. 26, No. 4, Temmuz 2015, s. 1200-1209, ISSN: 09218831
BALCI ÖZGE,AĞAOĞULLARI DUYGU,OVALI DÖNDAŞ DİDEM,ÖVEÇOĞLU MUSTAFA LUTFİ,DUMAN İSMAİL
Duygu Ağaoğulları Özgün Makale
Effects of different milling conditions on the properties of lanthanum hexaboride nanoparticles and their sintered bodies
CERAMICS INTERNATIONAL, Vol. 45, No. 15, Ekim 2019, s. 18236-18246, ISSN: 0272-8842
AĞAOĞULLARI DUYGU,BALCI ÖZGE,AKÇAMLI NAZLI,DUMAN İSMAİL,ÖVEÇOĞLU MUSTAFA LUTFİ
Microstructural Evaluation of ZrB2/ZrO2 Ceramic Powders Prepared by Milling-Assisted Magnesiothermic Reduction of Oxide Raw Materials
KONA Powder and Particle Journal, Vol. 34, No. 0, Ocak 2017, s. 183-196, ISSN: 0288-4534
AĞAOĞULLARI DUYGU,BALCI ÖZGE,ÖVEÇOĞLU MUSTAFA LUTFİ,DUMAN İSMAİL
Rule-based Milling of Medieval Stone Patterns
Nexus Network Journal, No. 25, Nisan 2023, s. 945-960, ISSN: 1590-5896
HAMZAOĞLU BEGÜM, ÖZKAR MİNE
Effective circulating load ratio in mill circuit for milling capacity and further flotation process - lab scale study
Politechnika Wroclawska Oficyna Wydawnicza, Vol. 58, No. 5, Mayıs 2022, ISSN: 1643-1049
PURAL YUSUF ENES, ÇELİK MUHAMMED, ÖZER MUSTAFA, BOYLU FERİDUN
Mustafa Özer Özgün Makale
Estimation of cutting forces in CNC slot-milling of low-cost clay reinforced syntactic metal foams by artificial neural network modeling
Multidiscipline Modeling in Materials and Structures, Vol. 20, No. 3, Mart 2024, s. 417-436, ISSN: 1573-6105
BOLAT ÇAĞIN,ÖZDOĞAN OSMAN NURİ,ÇOBAN SARP,ERGENE BERKAY,AKGÜN İSMAİL CEM,GÖKŞENLİ ALİ
Ali Gökşenli Özgün Makale
Investigation of Residual Stresses Induced by Milling of Compacted Graphite Iron by x-ray Diffraction Technique
Journal of Materials Engineering and Performance, Kasım 2023, s. 1-10, ISSN: 1059-9495
KARA MEHMET EMRE, KUZU ALİ TANER, BAKKAL MUSTAFA
Mustafa Bakkal Özgün Makale
Mechanochemical Synthesis and Characterization Investigations of W borides from WO3, B2O3 and Mg by High-Energy Ball Milling
EurasianSciEnTech 2021 3rd International Eurasian Conference on Science, Engineering and Technology, 15 Aralık 2021
SÜZER İLAYDA, AKBARİ AMİR, AYSEL ESİN, MERTDİNÇ ÜLKÜSEVEN SIDDIKA, ÖVEÇOĞLU MUSTAFA LUTFİ, AĞAOĞULLARI DUYGU
Determination of Tool Wear, Surface Roughness and Cutting Temperature Parameters in Milling St37 Steel
7th International Conference on Engineering Technologies (ICENTE), KONYA/TÜRKİYE, 23 Kasım 2023, s. 233-237
DEĞİRMENCİ ÜNAL, USCA ÜSAME ALİ, ŞAP SERHAT
Ünal Değirmenci Tam metin bildiri
Waste to Resource: Surface Modification of Electric Arc Furnace Flue Dust by Ball Milling and In Situ Carbonization
Journal of Sustainable Metallurgy, Mart 2024, ISSN: 2199-3823
KARAHAN BİLLUR DENİZ,GÜLCAN MEHMET FERYAT
Billur Deniz Karahan Özgün Makale
Estimation of cutting forces in CNC slot-milling of low-cost clay reinforced syntactic metal foams by artificial neural network modeling
Multidiscipline Modeling in Materials and Structures, Vol. 20, No. 3, Mart 2024, s. 417-436, ISSN: 1573-6105
BOLAT ÇAĞIN,ÇOBAN SARP,ERGENE BERKAY,AKGÜN İSMAİL CEM,GÖKŞENLİ ALİ
İsmail Cem Akgün Özgün Makale
Effective circulating load ratio in mill circuit for milling capacity and further flotation process - lab scale study
Physicochemical Problems of Mineral Processing, Vol. 58, No. 5, Mayıs 2022, ISSN: 1643-1049
PURAL YUSUF ENES, ÇELİK MUHAMMED, ÖZER MUSTAFA, BOYLU FERİDUN
Effective circulating load ratio in mill circuit for milling capacity and further flotation process - lab scale study
Politechnika Wroclawska Oficyna Wydawnicza, Vol. 58, No. 5, Mayıs 2022, ISSN: 1643-1049
PURAL YUSUF ENES, ÇELİK MUHAMMED, ÖZER MUSTAFA, BOYLU FERİDUN
Feridun Boylu Özgün Makale
Machining characterization and optimization under different cooling/lubrication conditions of Al-4Gr hybrid composites fabricated by vacuum sintering
Vacuum, Vol. 208, No. 111741, Şubat 2023, s. 1-16, ISSN: 1879-2715
DEĞİRMENCİ ÜNAL, USCA ÜSAME ALİ, ŞAP SERHAT
Rule-based Milling of Medieval Stone Patterns
Nexus Network Journal, No. 25, Nisan 2023, s. 945-960, ISSN: 1590-5896
HAMZAOĞLU BEGÜM, ÖZKAR MİNE
Effective circulating load ratio in mill circuit for milling capacity and further flotation process - lab scale study
Physicochemical Problems of Mineral Processing, Vol. 58, No. 5, Mayıs 2022, ISSN: 1643-1049
PURAL YUSUF ENES, ÇELİK MUHAMMED, ÖZER MUSTAFA, BOYLU FERİDUN

İLETİŞİM BİLGİLERİ

İstanbul Teknik Üniversitesi Rektörlüğü İTÜ Ayazağa Kampüsü Rektörlük Binası, Maslak-Sarıyer / İstanbul Tel: +90 212 285 3930