ARAMA SONUÇLARI

Toplam 67 adet sonuçtan 20 tanesi görüntülenmektedir.

Arama









Yıllara göre arama

Özel Aralık Girişi

Effective circulating load ratio in mill circuit for milling capacity and further flotation process - lab scale study
Physicochemical Problems of Mineral Processing, Vol. 58, No. 5, Mayıs 2022, ISSN: 1643-1049
PURAL YUSUF ENES, ÇELİK MUHAMMED, ÖZER MUSTAFA, BOYLU FERİDUN
AL8Mg-MultiWall-Carbon Nano Composites Prepared by Mechanical Milling and Hot Pressing
2. Ulusal Karbon Konferansı, İSTANBUL/TÜRKİYE, 16 Mart 2018
ÜNLÜ NECİP,YÜREKTÜRK YAKUP,ATEŞ BARIŞ,SAĞIR HÜSEYİN,KARA İSMAİL HAKKI,TÜFEKÇİOĞLU KEMAL ÇAĞLAR,YILMAZ ERDEM DOĞUKAN,ÇİMENOĞLU HÜSEYİN
Necip Ünlü Özet Bildiri
Influence of the milling process on TiB sub2/sub particle reinforced Al-7 wt.- Si matrix composites
Materials Testing, Vol. 60, No. 7-8, Temmuz 2018, s. 719-726, ISSN: 0025-5300
MERTDİNÇ SIDDIKA,TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt. Si-10 wt. TiB2 composites produced by sequential milling and pressureless sintering
International Journal of Materials Research, Vol. 110, No. 11, Kasım 2019, s. 1047-1057, ISSN: 1862-5282
TEKOĞLU EMRE,YÜREKTÜRK YAKUP,AĞAOĞULLARI DUYGU,SHAIKD ASAD ALI DILAWARY,BAYDOĞAN MURAT,ÖVEÇOĞLU MUSTAFA LUTFİ
Murat Baydoğan Özgün Makale
Correlation between milling parameters structural and mechanical properties of nanostructured austenitic Y2O3 strengthened steels
Materials Science Forum, Vol. 729, Ocak 2013, s. 409-414
KONCZ P,HORVTH A,BALAZSİ K,ŞAHİN FİLİZ,GÖLLER GÜLTEKİN,YÜCEL ONURALP,BALAZSİ CSABA
Filiz Şahin Özgün Makale
Effects of grinding media shape in milling of ceramic raw materials
XIV. International Mineral Processing Symposium & Exhibition, 15 Ekim 2014
KAYACI KAĞAN,YILDIRIM YILDIZ,ALTINTAŞ ALİ,KILIÇ MERT,DURGUT EMRAH,YİĞİT PALA ÇİĞDEM,ERGİN HASAN
Hasan Ergin Tam metin bildiri
Effects of tool axis offset in turn milling process
Journal of Materials Processing Technology, Vol. 231, Mayıs 2016, s. 239-247, ISSN: 09240136
KARAGÜZEL UMUT,UYSAL EMRE,BUDAK ERHAN,BAKKAL MUSTAFA
Mustafa Bakkal Özgün Makale
Effects of reinforcement content and sequential milling on the microstructural and mechanical properties of TiB2 particulate-reinforced eutectic Al-12.6 wt Si composites
Journal of Materials Science, Vol. 53, No. 4, Şubat 2018, s. 2537-2552, ISSN: 0022-2461
TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,MERTDİNÇ SIDDIKA,ÖVEÇOĞLU MUSTAFA LUTFİ
Effect of Ambient and Cryogenic Milling on the Microstructure and Properties of Tungsten Matrix Composites Fabricated by Activated Sintering
Cumhuriyet Science Journal, Vol. 40, No. 1, Mart 2019, s. 204-212, ISSN: 2587-2680
BALCI ÖZGE,AĞAOĞULLARI DUYGU,SOMER MEHMET SUAT,ÖVEÇOĞLU MUSTAFA LUTFİ
Effects of different milling conditions on the properties of lanthanum hexaboride nanoparticles and their sintered bodies
CERAMICS INTERNATIONAL, Vol. 45, No. 15, Ekim 2019, s. 18236-18246, ISSN: 0272-8842
AĞAOĞULLARI DUYGU,BALCI ÖZGE,AKÇAMLI NAZLI,DUMAN İSMAİL,ÖVEÇOĞLU MUSTAFA LUTFİ
Effective circulating load ratio in mill circuit for milling capacity and further flotation process - lab scale study
Physicochemical Problems of Mineral Processing, Vol. 58, No. 5, Mayıs 2022, ISSN: 1643-1049
PURAL YUSUF ENES, ÇELİK MUHAMMED, ÖZER MUSTAFA, BOYLU FERİDUN
Effect of Milling Time and the Consolidation Process on the Properties of Al Matrix Composites Reinforced with Fe-Based Glassy Particles
Metals, Vol. 5, No. 2, Haziran 2015, s. 669-685, ISSN: 2075-4701
BALCI ÖZGE,PRASHANTH KONDA,SCUDİNO SERGİO,AĞAOĞULLARI DUYGU,DUMAN İSMAİL,ÖVEÇOĞLU MUSTAFA LUTFİ,UHLENWİNKEL VOLKER,ECKERT JUERGEN
Duygu Ağaoğulları Özgün Makale
Correlation between milling parameters structural and mechanical properties of nanostructured austenitic Y2O3 strengthened steels
8th Hungarian Conference on Materials Science
KONCZ P, HORVARTH A, BALAZSİ K, SAHİN F, GOLLER G, YUCEL O, BALAZSİ C
Gültekin Göller Tam metin bildiri
Prediction of tool wear using regression and ANN models in end-milling operation a critical review
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 43, No. 7-8, Ağustos 2009, s. 765-766, ISSN: 0268-3768
ERDİK TARKAN,ŞEN ZEKAİ
Tarkan Erdik Vaka Takdimi
Effective circulating load ratio in mill circuit for milling capacity and further flotation process - lab scale study
Politechnika Wroclawska Oficyna Wydawnicza, Vol. 58, No. 5, Mayıs 2022, ISSN: 1643-1049
PURAL YUSUF ENES, ÇELİK MUHAMMED, ÖZER MUSTAFA, BOYLU FERİDUN
Feridun Boylu Özgün Makale
Machining characterization and optimization under different cooling/lubrication conditions of Al-4Gr hybrid composites fabricated by vacuum sintering
Vacuum, Vol. 208, Şubat 2023, ISSN: 0042-207X
DEĞİRMENCİ ÜNAL, USCA ÜSAME ALİ, ŞAP SERHAT
Effect of milling type on the microstructural and mechanical properties of W-Ni-ZrC-Y2O3 composites
CERAMICS INTERNATIONAL, Vol. 43, No. 9, Haziran 2017, s. 7106-7114, ISSN: 0272-8842
AĞAOĞULLARI DUYGU,BALCI ÖZGE,ÖVEÇOĞLU MUSTAFA LUTFİ
Modeling and measurement of cutting temperatures in milling
7th HPC 2016 – CIRP Conference on High Performance Cutting, Vol. 46, 31 Mayıs 2016, s. 173-176
BUDAK ERHAN,KARAGÜZEL UMUT,BAKKAL MUSTAFA
Mustafa Bakkal Tam metin bildiri
MEASUREMENT OF THE MILLING AND GRINDING INDUCED RESIDUAL STRESSES ON BULK METALLIC GLASS BY USING HOLE DRILLING METHOD9. Ulul
9. Uluslararası Talaşlı İmalat Sempozyumu, 8 Kasım 2018
YEŞİLOVA AYSU HANDE,AKDENİZ YÜKSEL,ÜNLÜ EMRE,TİMUR AZMİ,BAKKAL MUSTAFA
Mustafa Bakkal Tam metin bildiri
Determination of Tool Wear, Surface Roughness and Cutting Temperature Parameters in Milling St37 Steel
7th International Conference on Engineering Technologies (ICENTE), KONYA/TÜRKİYE, 23 Kasım 2023, s. 233-237
DEĞİRMENCİ ÜNAL, USCA ÜSAME ALİ, ŞAP SERHAT
Ünal Değirmenci Tam metin bildiri

İLETİŞİM BİLGİLERİ

İstanbul Teknik Üniversitesi Rektörlüğü İTÜ Ayazağa Kampüsü Rektörlük Binası, Maslak-Sarıyer / İstanbul Tel: +90 212 285 3930