Preparation of defect-rich, N-doped activated carbons via high-energy ball milling and investigation of their electrochemical performances towards hydrogen peroxide sensing
APPLIED NANOSCIENCE, Vol. 12, No. 5, Mayıs 2022, s. 1475-1489, ISSN: 2190-5509
UZUNOĞLU AYTEKİN, İPEKCİ HASAN HÜSEYİN
|
Effect of milling time, MWCNT content, and annealing temperature on microstructure and hardness of Fe/MWCNT nanocomposites synthesized by high-energy ball milling
Advanced Powder Technology, Vol. 32, No. 8, Temmuz 2021, s. 3107-3116, ISSN: 0921-8831
POLAT GÖKHAN, CANBOPLAT EMRE, UZUNOĞLU AYTEKİN, KOTAN HASAN
|
Effects of milling parameters on the microstructural and thermal properties of nanocrystalline lanthanum hexaboride powders
Journal of the Australian Ceramic Society, Vol. 54, No. 1, Mart 2018, s. 177-190, ISSN: 2510-1560
AĞAOĞULLARI DUYGU,BALCI ÖZGE,ÖVEÇOĞLU MUSTAFA LUTFİ,DUMAN İSMAİL
|
Work Piece Temperature Distribution Analysis with Inverse Heat Transfer Method in Milling
13th UK Heat Transfer Conference, 14 Temmuz 2014, s. 1-7
GÜNGÖR TAYGUN RECEP, KUZU AHMET TANER, BAKKAL MUSTAFA, ÖZDEMİR MUSTAFA
|
Investigating Eccentricity Effects in Turn milling Operations
Procedia CIRP, Vol. 14, Ocak 2014, s. 176-181, ISSN: 22128271
UYSAL EMRE,KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA
|
Experimental investigation of tool wear in micro milling
8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Aydın, Kuşadası, Türkiye, Aydın/TÜRKİYE, 18 Haziran 2015
ERSEN HATİPOĞLU,BUDAK ERHAN,BAKKAL MUSTAFA
|
Cutting Temperature and Tool Wear in Turn Milling
The 4th International Conference on Virtual Machining Process Technology (VMPT 2015), 2 Haziran 2015
KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA
|
Rule-based Milling of Medieval Stone Patterns
Nexus Network Journal, Nisan 2023, ISSN: 1522-4600
HAMZAOĞLU BEGÜM, ÖZKAR KABAKÇIOĞLU MİNE
|
Machinability of bulk metallic glass materials on milling and drilling
Advanced Materials Research, No. 83-86, 2010, s. 335-341
BAKKAL MUSTAFA
|
Effects of Tool Axis Offset in Turn Milling Process
Journal of Materials Processing Technology, Aralık 2015, ISSN: 09240136
KARAGÜZEL UMUT,UYSAL EMRE,BUDAK ERHAN,BAKKAL MUSTAFA
|
Machinibility of zirconium based bulk metallic glass on drilling and milling
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2008
VELİ NAKŞİLER
|
MEASUREMENT OF THE MILLING AND GRINDING INDUCED RESIDUAL STRESSES ON BULK METALLIC GLASS BY USING HOLE DRILLING METHOD
9th International Congress on Machining, Antalya, Türkiye,, Antalya/TÜRKİYE, 8 Kasım 2018
YÜCEL AYSU HANDE, BAKKAL MUSTAFA
|
Characterization Investigations of NbB2/NbC Particulate Reinforced Al-7 Wt. SiComposites Synthesized via Various Milling Processes and Pressureless Sintering
IMMC 2018 19th InternationalMetallurgyand Materials25/27 October Congress, 25 Ekim 2018
MERTDİNÇ SIDDIKA,TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Characterization Investigations of a Al-5 wt Si 2 wt. (NbB2, NbC) Hybrid Composite Fabricated via Mechanical Alloying and Sequentially Milling (Mechanical AlloyingCryomilling)
ICAFM 2017, Los Angles/AMERİKA BİRLEŞİK DEVLETLERİ, 4 Ağustos 2017
ÖVEÇOĞLU MUSTAFA LUTFİ,TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,AĞAOĞULLARI DUYGU
|
EFFECT OF SEQUENTIAL MILLING (MECHANICAL ALLOYING-CRYOGENICMILLING) ON THE MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF TIB2REINFORCED AL-12.6 WT. SI MMCS
BRAMAT 2017, Brasov/ROMANYA, 7 Mart 2017, s. 119
TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Effects of grinding media shape in milling of ceramic raw materials
XIV. International Mineral Processing Symposium & Exhibition, 15 Ekim 2014
KAYACI KAĞAN,YILDIRIM YILDIZ,ALTINTAŞ ALİ,KILIÇ MERT,DURGUT EMRAH,YİĞİT PALA ÇİĞDEM,ERGİN HASAN
|
Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt. Si-10 wt. TiB2 composites produced by sequential milling and pressureless sintering
International Journal of Materials Research, Vol. 110, No. 11, Kasım 2019, s. 1047-1057, ISSN: 1862-5282
TEKOĞLU EMRE,YÜREKTÜRK YAKUP,AĞAOĞULLARI DUYGU,SHAIKD ASAD ALI DILAWARY,BAYDOĞAN MURAT,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Prediction of tool wear using regression and ANN models in end-milling operation a critical review
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 43, No. 7-8, Ağustos 2009, s. 765-766, ISSN: 0268-3768
ERDİK TARKAN,ŞEN ZEKAİ
|
Improving performance of turn milling by controlling forces and thermally induced tool center point TCP displacement
13th Global Conference on Sustainable Manufacturing: Decoupling Growth from Resource Use, 16 Eylül 2015
MI PUTZ,SI IHLENFELDT,KARAGÜZEL UMUT,UL SEMMLER,BUDAK ERHAN,BAKKAL MUSTAFA,RU WERTHEIM
|
MEASUREMENT OF THE MILLING AND GRINDING INDUCED RESIDUAL STRESSES ON BULK METALLIC GLASS BY USING HOLE DRILLING METHOD9. Ulul
9. Uluslararası Talaşlı İmalat Sempozyumu, 8 Kasım 2018
YEŞİLOVA AYSU HANDE,AKDENİZ YÜKSEL,ÜNLÜ EMRE,TİMUR AZMİ,BAKKAL MUSTAFA
|