Preparation of defect-rich, N-doped activated carbons via high-energy ball milling and investigation of their electrochemical performances towards hydrogen peroxide sensing
APPLIED NANOSCIENCE, Vol. 12, No. 5, Mayıs 2022, s. 1475-1489, ISSN: 2190-5509
UZUNOĞLU AYTEKİN, İPEKCİ HASAN HÜSEYİN
|
Effect of milling time, MWCNT content, and annealing temperature on microstructure and hardness of Fe/MWCNT nanocomposites synthesized by high-energy ball milling
Advanced Powder Technology, Vol. 32, No. 8, Temmuz 2021, s. 3107-3116, ISSN: 0921-8831
POLAT GÖKHAN, CANBOPLAT EMRE, UZUNOĞLU AYTEKİN, KOTAN HASAN
|
Effects of milling parameters on the microstructural and thermal properties of nanocrystalline lanthanum hexaboride powders
Journal of the Australian Ceramic Society, Vol. 54, No. 1, Mart 2018, s. 177-190, ISSN: 2510-1560
AĞAOĞULLARI DUYGU,BALCI ÖZGE,ÖVEÇOĞLU MUSTAFA LUTFİ,DUMAN İSMAİL
|
Work Piece Temperature Distribution Analysis with Inverse Heat Transfer Method in Milling
13th UK Heat Transfer Conference, 14 Temmuz 2014, s. 1-7
GÜNGÖR TAYGUN RECEP, KUZU AHMET TANER, BAKKAL MUSTAFA, ÖZDEMİR MUSTAFA
|
Investigating Eccentricity Effects in Turn milling Operations
Procedia CIRP, Vol. 14, Ocak 2014, s. 176-181, ISSN: 22128271
UYSAL EMRE,KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA
|
Experimental investigation of tool wear in micro milling
8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Aydın, Kuşadası, Türkiye, Aydın/TÜRKİYE, 18 Haziran 2015
ERSEN HATİPOĞLU,BUDAK ERHAN,BAKKAL MUSTAFA
|
Cutting Temperature and Tool Wear in Turn Milling
The 4th International Conference on Virtual Machining Process Technology (VMPT 2015), 2 Haziran 2015
KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA
|
Rule-based Milling of Medieval Stone Patterns
Nexus Network Journal, Nisan 2023, ISSN: 1522-4600
HAMZAOĞLU BEGÜM, ÖZKAR KABAKÇIOĞLU MİNE
|
Machinability of bulk metallic glass materials on milling and drilling
Advanced Materials Research, No. 83-86, 2010, s. 335-341
BAKKAL MUSTAFA
|
Effects of Tool Axis Offset in Turn Milling Process
Journal of Materials Processing Technology, Aralık 2015, ISSN: 09240136
KARAGÜZEL UMUT,UYSAL EMRE,BUDAK ERHAN,BAKKAL MUSTAFA
|
Machinibility of zirconium based bulk metallic glass on drilling and milling
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2008
VELİ NAKŞİLER
|
Effect of milling type on the microstructural and mechanical properties of W-Ni-ZrC-Y2O3 composites
CERAMICS INTERNATIONAL, Vol. 43, No. 9, Haziran 2017, s. 7106-7114, ISSN: 0272-8842
AĞAOĞULLARI DUYGU,BALCI ÖZGE,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Microstructural Evaluation of ZrB2/ZrO2 Ceramic Powders Prepared by Milling-Assisted Magnesiothermic Reduction of Oxide Raw Materials
KONA Powder and Particle Journal, Vol. 34, No. 0, Ocak 2017, s. 183-196, ISSN: 0288-4534
AĞAOĞULLARI DUYGU,BALCI ÖZGE,ÖVEÇOĞLU MUSTAFA LUTFİ,DUMAN İSMAİL
|
Effect of Ambient and Cryogenic Milling on the Microstructure and Properties of Tungsten Matrix Composites Fabricated by Activated Sintering
Cumhuriyet Science Journal, Vol. 40, No. 1, Mart 2019, s. 204-212, ISSN: 2587-2680
BALCI ÖZGE,AĞAOĞULLARI DUYGU,SOMER MEHMET SUAT,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Synthesis of LaB6–Al2O3 nanocomposite powders via ball milling-assisted annealing
Journal of Materials Science, Vol. 53, No. 19, Ekim 2018, s. 13538-13549, ISSN: 0022-2461
TEKOĞLU EMRE,İMER CEREN,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Influence of the milling process on TiB2 particle reinforced Al-7 wt. Si matrix composites
Materials Testing, Vol. 60, Temmuz 2018, s. 719-726, ISSN: 0025-5300
MERTDİNÇ SIDDIKA,TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Synthesis and characterization of graphite-encapsulated iron nanoparticles from ball milling-assisted low-pressure chemical vapor deposition
Carbon, Vol. 124, Kasım 2017, s. 170-179, ISSN: 00086223
AĞAOĞULLARI DUYGU,MADSEN STEVEN J,ÖGÜT BURCU,KOH Aİ LEEN,SİNCLAİR ROBERT
|
Effects of reinforcement content and sequential milling on the microstructural and mechanical properties of TiB2 particulate-reinforced eutectic Al-12.6 wt Si composites
Journal of Materials Science, Vol. 53, No. 4, Şubat 2018, s. 2537-2552, ISSN: 0022-2461
TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,MERTDİNÇ SIDDIKA,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Effect of tungsten disilicide addition on tungsten boride based composites produced by milling-assisted pressureless sintering
Bor Dergisi, Vol. 3, No. 1, Mart 2018, s. 42-50, ISSN: 2149-9020
OVALI DÖNDAŞ DİDEM,AĞAOĞULLARI DUYGU,GÖKÇE HASAN,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Effect of Milling Time and the Consolidation Process on the Properties of Al Matrix Composites Reinforced with Fe-Based Glassy Particles
Metals, Vol. 5, No. 2, Haziran 2015, s. 669-685, ISSN: 2075-4701
BALCI ÖZGE,PRASHANTH KONDA,SCUDİNO SERGİO,AĞAOĞULLARI DUYGU,DUMAN İSMAİL,ÖVEÇOĞLU MUSTAFA LUTFİ,UHLENWİNKEL VOLKER,ECKERT JUERGEN
|