Effect of milling type on the microstructural and mechanical properties of W-Ni-ZrC-Y2O3 composites
CERAMICS INTERNATIONAL, Vol. 43, No. 9, Haziran 2017, s. 7106-7114, ISSN: 0272-8842
AĞAOĞULLARI DUYGU,BALCI ÖZGE,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Characterization Investigations of a Al-5 wt. Si/2 wt (NbB2, NbC) Hybrid Composite Fabricated via Mechanically Alloying and Sequentially Milling (Mechanical Alloying Cryomilling)
2017 The 2nd International Conference on Advanced Functional Materials (ICAFM 2017), Los Angeles/AMERİKA BİRLEŞİK DEVLETLERİ, Vol. 759, 4 Ağustos 2017, s. 35-39, ISSN: 1662-9795
ÖVEÇOĞLU MUSTAFA LUTFİ,TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,AĞAOĞULLARI DUYGU
|
Synthesis and characterization of graphite-encapsulated iron nanoparticles from ball milling-assisted low-pressure chemical vapor deposition
Carbon, Vol. 124, Kasım 2017, s. 170-179, ISSN: 00086223
AĞAOĞULLARI DUYGU,MADSEN STEVEN J,ÖGÜT BURCU,KOH Aİ LEEN,SİNCLAİR ROBERT
|
Effects of milling time and reductant content on the formation of HfC-HfB2 composite powders synthesized via a solid-state reaction route
Ceramics International, Vol. 47, Ocak 2021, ISSN: 0272-8842
TEKOĞLU EMRE, ÖVEÇOĞLU MUSTAFA LUTFİ, AĞAOĞULLARI DUYGU
|
Effects of reinforcement content and sequential milling on the microstructural and mechanical properties of TiB2 particulate-reinforced eutectic Al-12.6 wt Si composites
Journal of Materials Science, Vol. 53, No. 4, Şubat 2018, s. 2537-2552, ISSN: 0022-2461
TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,MERTDİNÇ SIDDIKA,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Synthesis of HfB2-HfC Nanocomposite Powders via Ball-Milling Assisted Annealing
IV. International Ceramic, Glass, Porcelain, Enamel, Glaze and Pigment Congress (SERES 2018), Eskişehir/TÜRKİYE, 10 Ekim 2018, s. 537
TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,MERTDİNÇ SIDDIKA,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Microstructural Evaluation of ZrB2/ZrO2 Ceramic Powders Prepared by Milling-Assisted Magnesiothermic Reduction of Oxide Raw Materials
KONA Powder and Particle Journal, Vol. 34, No. 0, Ocak 2017, s. 183-196, ISSN: 0288-4534
AĞAOĞULLARI DUYGU,BALCI ÖZGE,ÖVEÇOĞLU MUSTAFA LUTFİ,DUMAN İSMAİL
|
Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt. Si-10 wt. TiB2 composites produced by sequential milling and pressureless sintering
International Journal of Materials Research, Vol. 110, No. 11, Kasım 2019, s. 1047-1057, ISSN: 1862-5282
TEKOĞLU EMRE,YÜREKTÜRK YAKUP,AĞAOĞULLARI DUYGU,SHAIKD ASAD ALI DILAWARY,BAYDOĞAN MURAT,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Direct Conversion of Celestite to SrCO3 by Wet Milling
TMS 2017 146th Annual Meeting Exhibition Supplemental Proceedings, San Diego/AMERİKA BİRLEŞİK DEVLETLERİ, 26 Şubat 2017, s. 609-614
SEZER RAŞİT,BİLEN AYŞEGÜL,HIZLI İBRAHİM GÖKSEL,SELİM ERTÜRK,ARSLAN CÜNEYT
|
Waste to Resource: Surface Modification of Electric Arc Furnace Flue Dust by Ball Milling and In Situ Carbonization
Journal of Sustainable Metallurgy, Mart 2024, ISSN: 2199-3823
KARAHAN BİLLUR DENİZ,GÜLCAN MEHMET FERYAT
|
Effective circulating load ratio in mill circuit for milling capacity and further flotation process - lab scale study
Politechnika Wroclawska Oficyna Wydawnicza, Vol. 58, No. 5, Mayıs 2022, ISSN: 1643-1049
PURAL YUSUF ENES, ÇELİK MUHAMMED, ÖZER MUSTAFA, BOYLU FERİDUN
|
MEASUREMENT OF THE MILLING AND GRINDING INDUCED RESIDUAL STRESSES ON BULK METALLIC GLASS BY USING HOLE DRILLING METHOD
9th International Congress on Machining, Antalya, Türkiye,, Antalya/TÜRKİYE, 8 Kasım 2018
YÜCEL AYSU HANDE, BAKKAL MUSTAFA
|
Effective circulating load ratio in mill circuit for milling capacity and further flotation process - lab scale study
Physicochemical Problems of Mineral Processing, Vol. 58, No. 5, Mayıs 2022, ISSN: 1643-1049
PURAL YUSUF ENES, ÇELİK MUHAMMED, ÖZER MUSTAFA, BOYLU FERİDUN
|
Correlation between milling parameters structural and mechanical properties of nanostructured austenitic Y2O3 strengthened steels
8th Hungarian Conference on Materials Science
KONCZ P, HORVARTH A, BALAZSİ K, SAHİN F, GOLLER G, YUCEL O, BALAZSİ C
|