Preparation of defect-rich, N-doped activated carbons via high-energy ball milling and investigation of their electrochemical performances towards hydrogen peroxide sensing
APPLIED NANOSCIENCE, Vol. 12, No. 5, Mayıs 2022, s. 1475-1489, ISSN: 2190-5509
UZUNOĞLU AYTEKİN, İPEKCİ HASAN HÜSEYİN
|
Effect of milling time, MWCNT content, and annealing temperature on microstructure and hardness of Fe/MWCNT nanocomposites synthesized by high-energy ball milling
Advanced Powder Technology, Vol. 32, No. 8, Temmuz 2021, s. 3107-3116, ISSN: 0921-8831
POLAT GÖKHAN, CANBOPLAT EMRE, UZUNOĞLU AYTEKİN, KOTAN HASAN
|
A Study on the Machinability and Environmental Effects of Milling AISI 5140 Steel in Sustainable Cutting Environments
Machines, Vol. 12, No. 436, Haziran 2024, s. 1-15, ISSN: 2075-1702
ZEROOĞLU TUFAN,DEĞİRMENCİ ÜNAL,ŞAP SERHAT
|
Effects of milling parameters on the microstructural and thermal properties of nanocrystalline lanthanum hexaboride powders
Journal of the Australian Ceramic Society, Vol. 54, No. 1, Mart 2018, s. 177-190, ISSN: 2510-1560
AĞAOĞULLARI DUYGU,BALCI ÖZGE,ÖVEÇOĞLU MUSTAFA LUTFİ,DUMAN İSMAİL
|
Work Piece Temperature Distribution Analysis with Inverse Heat Transfer Method in Milling
13th UK Heat Transfer Conference, 14 Temmuz 2014, s. 1-7
GÜNGÖR TAYGUN RECEP, KUZU AHMET TANER, BAKKAL MUSTAFA, ÖZDEMİR MUSTAFA
|
Investigating Eccentricity Effects in Turn milling Operations
Procedia CIRP, Vol. 14, Ocak 2014, s. 176-181, ISSN: 22128271
UYSAL EMRE,KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA
|
Experimental investigation of tool wear in micro milling
8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Aydın, Kuşadası, Türkiye, Aydın/TÜRKİYE, 18 Haziran 2015
ERSEN HATİPOĞLU,BUDAK ERHAN,BAKKAL MUSTAFA
|
Cutting Temperature and Tool Wear in Turn Milling
The 4th International Conference on Virtual Machining Process Technology (VMPT 2015), 2 Haziran 2015
KARAGÜZEL UMUT,BUDAK ERHAN,BAKKAL MUSTAFA
|
Effects of Sustainable Cooling/Lubrication Techniques Used in Milling S960 Steel on Energy Consumption
4th International Conference on Innovative Academic Studies, 12 Mart 2024
ŞAP SERHAT,DEĞİRMENCİ ÜNAL
|
Rule-based Milling of Medieval Stone Patterns
Nexus Network Journal, Nisan 2023, ISSN: 1522-4600
HAMZAOĞLU BEGÜM, ÖZKAR KABAKÇIOĞLU MİNE
|
Machinability of bulk metallic glass materials on milling and drilling
Advanced Materials Research, No. 83-86, 2010, s. 335-341
BAKKAL MUSTAFA
|
Effects of Tool Axis Offset in Turn Milling Process
Journal of Materials Processing Technology, Aralık 2015, ISSN: 09240136
KARAGÜZEL UMUT,UYSAL EMRE,BUDAK ERHAN,BAKKAL MUSTAFA
|
Machining parameters and distortion analyses in end milling of AA2050 and AA7050
Fen Bilimleri Enstitüsü, Ankara Yıldırım Beyazıt Üniversitesi, 2022
ELVAN ATEŞ
|
Effects of milling parameters on surface quality of Ti-6Al-4V
Fen Bilimleri Enstitüsü, Ankara Yıldırım Beyazıt Üniversitesi, 2023
BURAK KAYMAK
|
Machinibility of zirconium based bulk metallic glass on drilling and milling
Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, 2008
VELİ NAKŞİLER
|
Effect of milling type on the microstructural and mechanical properties of W-Ni-ZrC-Y2O3 composites
CERAMICS INTERNATIONAL, Vol. 43, No. 9, Haziran 2017, s. 7106-7114, ISSN: 0272-8842
AĞAOĞULLARI DUYGU,BALCI ÖZGE,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Direct Conversion of Celestite to SrCO3 by Wet Milling
TMS 2017 146th Annual Meeting Exhibition Supplemental Proceedings, San Diego/AMERİKA BİRLEŞİK DEVLETLERİ, 26 Şubat 2017, s. 609-614
SEZER RAŞİT,BİLEN AYŞEGÜL,HIZLI İBRAHİM GÖKSEL,SELİM ERTÜRK,ARSLAN CÜNEYT
|
Microstructural Evaluation of ZrB2/ZrO2 Ceramic Powders Prepared by Milling-Assisted Magnesiothermic Reduction of Oxide Raw Materials
KONA Powder and Particle Journal, Vol. 34, No. 0, Ocak 2017, s. 183-196, ISSN: 0288-4534
AĞAOĞULLARI DUYGU,BALCI ÖZGE,ÖVEÇOĞLU MUSTAFA LUTFİ,DUMAN İSMAİL
|
Effect of Ambient and Cryogenic Milling on the Microstructure and Properties of Tungsten Matrix Composites Fabricated by Activated Sintering
Cumhuriyet Science Journal, Vol. 40, No. 1, Mart 2019, s. 204-212, ISSN: 2587-2680
BALCI ÖZGE,AĞAOĞULLARI DUYGU,SOMER MEHMET SUAT,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Synthesis of LaB6–Al2O3 nanocomposite powders via ball milling-assisted annealing
Journal of Materials Science, Vol. 53, No. 19, Ekim 2018, s. 13538-13549, ISSN: 0022-2461
TEKOĞLU EMRE,İMER CEREN,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|