Effect of tungsten disilicide addition on tungsten boride based composites produced by milling-assisted pressureless sintering
Bor Dergisi, Vol. 3, No. 1, Mart 2018, s. 42-50, ISSN: 2149-9020
OVALI DÖNDAŞ DİDEM,AĞAOĞULLARI DUYGU,GÖKÇE HASAN,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Effective circulating load ratio in mill circuit for milling capacity and further flotation process - lab scale study
Politechnika Wroclawska Oficyna Wydawnicza, Vol. 58, No. 5, Mayıs 2022, ISSN: 1643-1049
PURAL YUSUF ENES, ÇELİK MUHAMMED, ÖZER MUSTAFA, BOYLU FERİDUN
|
Influence of the milling process on TiB sub2/sub particle reinforced Al-7 wt.- Si matrix composites
Materials Testing, Vol. 60, No. 7-8, Temmuz 2018, s. 719-726, ISSN: 0025-5300
MERTDİNÇ SIDDIKA,TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Investigation of indentation and dry sliding wear behaviour of Al-12.6 wt. Si-10 wt. TiB2 composites produced by sequential milling and pressureless sintering
International Journal of Materials Research, Vol. 110, No. 11, Kasım 2019, s. 1047-1057, ISSN: 1862-5282
TEKOĞLU EMRE,YÜREKTÜRK YAKUP,AĞAOĞULLARI DUYGU,SHAIKD ASAD ALI DILAWARY,BAYDOĞAN MURAT,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Correlation between milling parameters structural and mechanical properties of nanostructured austenitic Y2O3 strengthened steels
Materials Science Forum, Vol. 729, Ocak 2013, s. 409-414
KONCZ P,HORVTH A,BALAZSİ K,ŞAHİN FİLİZ,GÖLLER GÜLTEKİN,YÜCEL ONURALP,BALAZSİ CSABA
|
Effects of grinding media shape in milling of ceramic raw materials
XIV. International Mineral Processing Symposium & Exhibition, 15 Ekim 2014
KAYACI KAĞAN,YILDIRIM YILDIZ,ALTINTAŞ ALİ,KILIÇ MERT,DURGUT EMRAH,YİĞİT PALA ÇİĞDEM,ERGİN HASAN
|
Effects of tool axis offset in turn milling process
Journal of Materials Processing Technology, Vol. 231, Mayıs 2016, s. 239-247, ISSN: 09240136
KARAGÜZEL UMUT,UYSAL EMRE,BUDAK ERHAN,BAKKAL MUSTAFA
|
Characterization Investigations of a Al-5 wt Si 2 wt. (NbB2, NbC) Hybrid Composite Fabricated via Mechanical Alloying and Sequentially Milling (Mechanical AlloyingCryomilling)
ICAFM 2017, Los Angles/AMERİKA BİRLEŞİK DEVLETLERİ, 4 Ağustos 2017
ÖVEÇOĞLU MUSTAFA LUTFİ,TEKOĞLU EMRE,MERTDİNÇ SIDDIKA,AĞAOĞULLARI DUYGU
|
Investigation of Residual Stresses Induced by Milling of Compacted Graphite Iron by x-ray Diffraction Technique
Journal of Materials Engineering and Performance, Kasım 2023, s. 1-10, ISSN: 1059-9495
KARA MEHMET EMRE, KUZU ALİ TANER, BAKKAL MUSTAFA
|
Synthesis and characterization of graphite-encapsulated iron nanoparticles from ball milling-assisted low-pressure chemical vapor deposition
Carbon, Vol. 124, Kasım 2017, s. 170-179, ISSN: 00086223
AĞAOĞULLARI DUYGU,MADSEN STEVEN J,ÖGÜT BURCU,KOH Aİ LEEN,SİNCLAİR ROBERT
|
AL8MG-MULTIWALL-CARBON NANO COMPOSITES PREPARED BY MECHANICAL MILLING AND HOT PRESSING
2. Ulusal Karbon Konferansı, İSTANBUL/TÜRKİYE, 16 Mart 2018, s. 1-2
ÜNLÜ NECİP,YÜREKTÜRK YAKUP,ATEŞ BARIŞ,SAĞIR HÜSEYİN,KARA İSMAİL HAKKI,TÜFEKÇİOĞLU KEMAL ÇAĞLAR,YILMAZ ERDEM DOĞUKAN,ÇİMENOĞLU HÜSEYİN
|
Machinability of Bulk Metallic Glass Materials on Milling and Drilling
Advanced Materials Research, Vol. 8386, Aralık 2009, s. 335-341, ISSN: 1662-8985
BAKKAL MUSTAFA,DERİN CEVAT BORA,NAKŞİLER VELİ
|
Mechanochemical Synthesis and Characterization Investigations of W borides from WO3, B2O3 and Mg by High-Energy Ball Milling
EurasianSciEnTech 2021 3rd International Eurasian Conference on Science, Engineering and Technology, 15 Aralık 2021
SÜZER İLAYDA, AKBARİ AMİR, AYSEL ESİN, MERTDİNÇ ÜLKÜSEVEN SIDDIKA, ÖVEÇOĞLU MUSTAFA LUTFİ, AĞAOĞULLARI DUYGU
|
Effects of reinforcement content and sequential milling on the microstructural and mechanical properties of TiB2 particulate-reinforced eutectic Al-12.6 wt Si composites
Journal of Materials Science, Vol. 53, No. 4, Şubat 2018, s. 2537-2552, ISSN: 0022-2461
TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,MERTDİNÇ SIDDIKA,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Mechanochemical Synthesis and Characterization Investigations of W borides from WO3, B2O3 and Mg by High-Energy Ball Milling
3rd International Eurasian Conference on Science, Engineering and Technology, 15 Aralık 2021
SÜZER İLAYDA, AYSEL ESİN, AKBARİ AMİR, MERTDİNÇ SIDDIKA, ÖVEÇOĞLU MUSTAFA LUTFİ, AĞAOĞULLARI DUYGU
|
Characterization Investigations of NbB2/NbC Particulate Reinforced Al-7 wt. Si Composites Synthesized via Various Milling Processes and Pressureless Sintering
19th International Metallurgy Materials Congress (IMMC 2018), İstanbul/TÜRKİYE, 25 Ekim 2018, s. 172-175
MERTDİNÇ SIDDIKA,TEKOĞLU EMRE,AĞAOĞULLARI DUYGU,ÖVEÇOĞLU MUSTAFA LUTFİ
|
Formation and occurrence of organic matter-hosted porosity in shales
INTERNATIONAL JOURNAL OF COAL GEOLOGY, Vol. 199, Ocak 2018, s. 13, ISSN: 0166-5162
İNAN SEDAT, BADAİRY HAMEED, İNAN TÜLAY, ZAHRANİ ALİ
|
Effective circulating load ratio in mill circuit for milling capacity and further flotation process - lab scale study
Physicochemical Problems of Mineral Processing, Vol. 58, No. 5, Mayıs 2022, ISSN: 1643-1049
PURAL YUSUF ENES, ÇELİK MUHAMMED, ÖZER MUSTAFA, BOYLU FERİDUN
|
Estimation of cutting forces in CNC slot-milling of low-cost clay reinforced syntactic metal foams by artificial neural network modeling
Multidiscipline Modeling in Materials and Structures, Vol. 20, No. 3, Mart 2024, s. 417-436, ISSN: 1573-6105
BOLAT ÇAĞIN,ÖZDOĞAN OSMAN NURİ,ÇOBAN SARP,ERGENE BERKAY,AKGÜN İSMAİL CEM,GÖKŞENLİ ALİ
|
AL8Mg-MultiWall-Carbon Nano Composites Prepared by Mechanical Milling and Hot Pressing
2. Ulusal Karbon Konferansı, İSTANBUL/TÜRKİYE, 16 Mart 2018
ÜNLÜ NECİP,YÜREKTÜRK YAKUP,ATEŞ BARIŞ,SAĞIR HÜSEYİN,KARA İSMAİL HAKKI,TÜFEKÇİOĞLU KEMAL ÇAĞLAR,YILMAZ ERDEM DOĞUKAN,ÇİMENOĞLU HÜSEYİN
|