Dynamic membrane bioreactor performance for treatment of municipal wastewaters at different sludge concentrations
Environmental Technology & Innovation, Vol. 22, Ocak 2021, ISSN: 2352-1864
IŞIK ONUR, KOYUNCU İSMAİL, DEMİR İBRAHİM, ERŞAHİN MUSTAFA EVREN, ÖZGÜN ERŞAHİN HALE, ABDELRAHMAN AMR MUSTAFA, ORMAN İREM, BATYROW MERDAN, PAŞAOĞLU MEHMET EMİN
|
Impact of support material type on performance of dynamic membrane bioreactors treating municipal wastewater
Journal of Chemical Technology & Biotechnology, Vol. 95, No. 9, Nisan 2020, s. 2437-2446, ISSN: 0268-2575
IŞIK ONUR, HUDAYARİZKA RİZA, ABDELRAHMAN AMR MUSTAFA, ÖZGÜN ERŞAHİN HALE, ERŞAHİN MUSTAFA EVREN, DEMİR İBRAHİM, KOYUNCU İSMAİL
|
Impact of support material type on dynamic MBR performance
9th IWA Membrane Technology Conference Exhibition for Water and Wastewater Treatment and Reuse, 23 Haziran 2019
IŞIK ONUR,HUDAYARİZKA RİZA,ABDELRAHMAN AMR M,ERŞAHİN MUSTAFA EVREN,ÖZGÜN ERŞAHİN HALE,DEMİR İBRAHİM,KOYUNCU İSMAİL
|
THE EFFECT OF BIO-RESIN CONTENT ON THE TENSILE PROPERTIES OF JUTE FABRIC REINFORCED EPOXY COMPOSITES
4th International Conference on Material Science and Technology (IMSTEC2019), ANKARA/TÜRKİYE, 18 Ekim 2019
ÖZKÜR SEMİH, SEZGİN HANDE, YALÇIN ENİŞ İPEK
|
Nanomaterials in Textile Applications
Journal of International Scientific Publications: Materials Methods & Technology, Vol. 6, No. 2, Ocak 2012, s. 303-317, ISSN: 1313-2539
SEZGİN HANDE, YALÇIN ENİŞ İPEK, KÜÇÜKALİ ÖZTÜRK MERVE, KIZILDAĞ NURAY
|
Tracing design students’ affective journeys through reflective writing
International Journal of Technology and Design Education, Vol. 28, No. 4, Aralık 2018, s. 1061-1081, ISSN: 0957-7572
GELMEZ KORAY,BAĞLI HATİCE HÜMANUR
|
A closer look into pedagogical roles of supporting staff in design studio courses: the case of research assistants in Turkey
International Journal of Technology and Design Education, Vol. 33, No. 3, Haziran 2023, s. 1143-1172, ISSN: 0957-7572
EFİLTİ PELİN, GELMEZ KORAY
|
The use of poly(styrene-co-chloromethyl styrene) in the modification of triglyceride oils
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, Vol. 19, No. 5, Ocak 2022, ISSN: 1547-0091
HAYRİ ŞENEL TUĞBA, YAZGAN BİRGİ PELİN, BİLDİK FATİH, ERCİYES AHMET TUNCER
|
Removal Of Ciprofloxacin From Waste Water By Photocatalytic Method With Waste Polystyrene And Tio2 Composites
18th International Conference on Environmental Science and Technology "CEST 2023", 30 Ağustos 2023, ISSN: ISSN 2944-9820
HAYRİ ŞENEL TUĞBA,KAHRAMAN EBRU,SEZER SERHAT,ERDÖL AYDIN NALAN,SAYGILI GÜLHAYAT
|
Technology Assessment of Hydrogen Storage: Cases Enabling the Clean Energy Transition
IEEE Transactions on Engineering Management, Vol. 71, Ocak 2024, ISSN: 0018-9391
QUDAİH SOVANA, BEKTAŞ ZEYNEP, GÜVEN DENİZHAN, KAYAKUTLU GÜLGÜN, KAYALICA MEHMET ÖZGÜR
|
Critical Power Demand Scheduling for Hospitals Using Repurposed EV Batteries
TECHNOLOGY AND ECONOMICS OF SMART GRIDS AND SUSTAINABLE ENERGY, Vol. 6, No. 1, Ekim 2021, ISSN: 2199-4706
GÜVEN DENİZHAN, KAYALICA MEHMET ÖZGÜR, KAYAKUTLU GÜLGÜN
|
Demand Response in Generation Capacity Planning Technology Roadmap: Turkey’s Quest Next Generation Roadmapping
2023, s. 233-250, Springer
KAYAKUTLU GÜLGÜN, KAYALICA MEHMET ÖZGÜR, DÜZDAR İREM, ACARTÜRK ALPER, DEVECİ KAAN, ATMACA ŞURA, GÜVEN DENİZHAN, TERZİ İDİLSU, DELİASLAN EREN, DAİM TUĞRUL U.
|
Antioxidant activities, aliphatic organic acid and sugar contents of Anatolian bee bread: characterization by principal component analysis
European Food Research and Technology, Vol. 249, No. 5, Mart 2023, s. 1351-1361, ISSN: 1438-2377
KALAYCIOĞLU ZEYNEP, DEMİR KANBUR ESRA, KOLAYLI SEVGİ, BERKER FATMA BEDİA
|
Characterization of Pekmez Samples Produced with Different Fruits According to Sugar, Organic Acid, Antioxidant Activities, and Moisture Contents
Journal of the Institute of Science and Technology, Vol. 13, No. 1, Mart 2023, s. 458-467, ISSN: 2146-0574
KALAYCIOĞLU ZEYNEP
|
Development of high void fraction polylactide composite foams using injection molding Mechanical and thermal insulation properties
Composites Science and Technology, Vol. 90, Ocak 2014, s. 88-95, ISSN: 02663538
AMELİ A,JAHANİ DAVUD,NOFAR MOHAMMADREZA,JUNG PJ,PARK CB
|
Foam 3D Printing of Thermoplastics: A Symbiosis of Additive Manufacturing and Foaming Technology
ADVANCED SCIENCE, Şubat 2022, ISSN: 2198-3844
NOFAR MOHAMMADREZA, UTZ J, GEİS N, ALTSTÄDT VOLKER, RUCKDÄSCHEL HOLGER
|
"Well, a tough question. Congratulations:" How and in what aspects do design students evaluate a design studio course?
INTERNATIONAL JOURNAL OF TECHNOLOGY AND DESIGN EDUCATION, Vol. 33, No. 4, Eylül 2023, s. 1585-1606, ISSN: 0957-7572
GELMEZ KORAY, EFİLTİ PELİN, YILMAZ ONUR
|
A deep dive into the impacts of empathy on design learning and teaching
International Journal of Technology and Design Education, Vol. 34, No. 2, Nisan 2024, s. 809-852, ISSN: 0957-7572
EFİLTİ PELİN, GELMEZ KORAY
|
Aligning a CAD course constructively: telling-to-peer and writing-to-peer activities for efficient use of CAD in design curricula
International Journal of Technology and Design Education, Vol. 32, No. 3, Temmuz 2022, s. 1813-1835, ISSN: 0957-7572
GELMEZ KORAY, ARKAN SELİN
|
Learning from students: Reflections from personal magazines in Basic Design course
Design and Technology Education: An International Journal, Vol. 20, No. 1, Ocak 2015, s. 29-37, ISSN: 1360-1431
GELMEZ KORAY,BAĞLI HATİCE HÜMANUR
|